614471

Elna eXperience 620 Manual

11
Zoom out
Zoom in
Previous page
1/98
Next page
9
Attaching and Removing Shank
Turn OFF the power switch. Raise the presser bar. Turn
the thumbscrew q counterclockwise with the screwdriver
to remove the shank.
To attach, match the hole in the shank w with the hole in
the presser bar e. Put thumbscrew in hole and turn
clockwise to tighten.
Seam Allowance Lines
The lines on the needle plate, machine bed and bobbin
cover plate help you measure seam width. The number
indicates the distance between the center needle
position (3.5) and the seam allowance line.
q Center needle position
w Edge of fabric
e Guidelines
r 90º pivot angle guideline for 5/8˝
q
w
e
q
w
e
r
Controlling Sewing Speed
Sewing speed can be varied with the foot control. The
harder you press on the foot control, the faster the
machine runs.
The maximum sewing speed can be varied by sliding the
speed control lever. For a faster speed, slide it to the
right; for a slower speed, slide it to the left.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elna eXperience 620 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elna eXperience 620 in the language / languages: English, German, French as an attachment in your email.

The manual is 6,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info