Manual Elna eXperience 620 (page 10 of 98) (English, German, French)

614471

Zoom out

Zoom in

1/98

Foot Pressure Dial

Align the foot pressure dial q with the setting mark w at

“3” for regular sewing.

Reduce the pressure to “2” for appliqué, cutwork, drawn

work, basting and embroidery.

Velours and knits with a lot of stretch may require a “1”

setting.

Presser Foot Lever and Additional Presser Foot

Clearance

Before sewing can occur, the presser foot must be

lowered to close the tension discs.

Raise and lower the foot with this lever q.

You can raise the presser foot about 6.5 mm (1/4˝) higher

than the normal up position for easy removal of the

presser foot or to place heavy fabrics under the presser

foot. Pull the presser foot lever up beyond the normal up

position.

Attaching and Removing Presser Feet

Press the “Up/Down Needle” key until the needle is in

the raised position.

Turn OFF the power switch. Raise the presser foot and

press the red button q on back of the shank. The

presser foot will drop off. Place the selected presser foot

so the pin e on the foot lies just under the groove w of

the shank. Lower the presser bar and attach the foot.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Elna eXperience 620 in the language / languages: English, German, French as an attachment in your email.

The manual is 6,25 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Elna eXperience 620 Manual

Product: