614475
24
Zoom out
Zoom in
Previous page
1/100
Next page
18
w
e
r
t
Changing Needles
Tu rn ON the power switch. Press the Up/Down
needle key q to raise the needle. Lower the presser
foot. Turn OFF the power switch.
Tu rn the needle clamp screw w counterclockwise to
loosen. Remove the needle from the clamp.
Insert the new needle into needle clamp with the flat
side r to the back, pushing it up against the stopper
pin e. Tighten the clamp screw firmly.
To determine if the needle is defective, place the flat
side of the needle on something flat (a needle plate,
piece of glass, etc.). The gap t between the needle
and the flat surface should be consistent.
Never use a bent or blunt needle, as it may cause
skipped stitches or thread breakage. Defective
needles can ruin the fabric. Always purchase good
quality needles. Change needles often.
q
Selecting the Correct Needle for Fabrics
There are many kinds of fabrics, threads and
needles. It is important to use the correct ones
together.
Always purchase good quality thread. It should be
strong, smooth and even in thickness. Use the
same thread for needle and bobbin. Always test
thread and needle size on a scrap piece of fabric.
In general, fine threads (the larger the number, the
finer the thread) and needles (the smaller the
number, the finer the needle) are used for sewing
lightweight fabrics and heavier threads and larger
needles are used for sewing heavyweight fabrics.
There are many specialty needles available from
your sewing machine dealer.
Check your needles frequently for rough or blunt
tips. Snags and runs in knits, fine silks and silklike
fabrics are permanent and are often caused
by damaged needles.
NOTE: A universal needle size 14/90 comes
inserted in your machine
Weight
Fabric Needle Type
Needle
Size
Very Chiffon, Fine Lace, Universal 9 (65)
Light Organdy Ball Point 9 (65)
Light
Batiste, Lawn, Crepe
Stretch 11 (75)
de Chine, Challis,
Handkerchief Linen,
Crepe, Taffeta, Satin
Universal 11 (75)
12 (80)
Single Knits, Jersey, Stretch 11 (75)
Swimwear, Tricot Ball Point 11 (75)
Leather, Suede Leather 11(75)
Medium
Flannel, Velour, Velvet,
Universal 14 (90)
Velveteen, Corduroy,
Linen, Gabardine,
Wool, Terry, Burlap
Double Knits, Stretch
Ball Point 14 (90)
Velour, Stretch Terry,
Sweater Knits
Leather, Vinyl, Suede
Leather 14 (90)
Heavy
Denim, Sailcloth,
Denim 16 (100)
Ticking
Coating, Polar Fleece,
Universal 16 (100)
Drapery, and
Upholstery Fabrics
Leather, Suede
Leather 16 (100)
Very
Canvas, Duck,
Universal 18 (110)
Heavy
Upholstery Fabrics
Topstitching for
Topstitching 11 (75)
Special Finish
14 (90)
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elna eXperience 540 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elna eXperience 540 in the language / languages: English, German, French as an attachment in your email.

The manual is 3,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info