Manual Elna eXperience 540 (page 22 of 100) (English, German, French)

614475

Zoom out

Zoom in

1/100

Raising and Lowering Presser Foot

The Presser foot lever q raises and lowers the

presser foot.

You can raise the presser foot about 6.5 mm (1/4˝)

higher than the normal up position w for easy removal

of the presser foot or to place heavy fabrics under

the presser foot. Pull the presser foot lever q up

beyond the normal up position e.

Adjusting Needle Thread Tension

The ideal straight stitch will have threads locked

between the two layers of fabric.

Needle thread tension can range from 2 – 6 q and is

normally set on 4.

Align the number 4 on the tension dial with the

setting mark w.

If you look at the needle thread e (top thread) and

bobbin thread r (bottom thread), you will notice

that there are no gaps. Each stitch is smooth and

even.

Occasionally the needle thread tension needs to be

adjusted. Examples:

— stiff or heavy fabric

— sewing more than two layers of fabric

— type of stitch

— thread

When adjusting needle thread tension, the higher

numbers tighten, the lower numbers loosen.

• Tension is too tight

The bobbin thread shows through on the topside of

the fabric and it will feel bumpy.

Turn the dial to a lower number to loosen the needle

thread tension.

•Tension is too loose

The needle thread shows through on the underside

of the fabric and it will feel bumpy.

Turn the dial to a higher number to tighten the

needle thread tension.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Elna eXperience 540 in the language / languages: English, German, French as an attachment in your email.

The manual is 3,59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Elna eXperience 540 Manual

Product: