703992

Elna eXperience 520S Manual

54
Zoom out
Zoom in
Previous page
1/100
Next page
48
3-step Zigzag (Multiple zigzag)
The 3-step zigzag (sometimes called a multiple
zigzag) is used to finish raw seam edges on synthetics
and other fabrics that tend to pucker.
This stitch gives a flatter edge finish than the regular
zigzag and is excellent for darning and mending tears
in fabric.
Place the fabric under the presser foot so the needle
swings off the fabric to the right or trim away any
excess fabric.
Machine Settings
q Pattern: #09
w Presser foot: Zigzag foot A
e Needle thread tension: 3–6
q we
Whip and Rolled Hem
Machine Settings
q Pattern: #08
w Presser foot: Satin stitch foot F
e Needle thread tension: 3–7
This technique produces a beautiful edge on ruffles
and hems. It should only be used for lightweight
fabrics and is commonly used in heirloom sewing.
Decrease stitch width to 3.5 and stitch length to 0.8.
The fabric edge must be clean cut with no unraveling
threads. Lay the fabric edge in the center of the foot.
The zigzag will catch the edge on the left and clear
the raw edge on the right, rolling the fabric.
q we
Mending a Tear
Machine Settings
q Pattern: #09
w Presser foot: Zigzag foot A
e Needle thread tension: 3–6
Pull torn edges together and fuse a piece of interfac-
ing slightly larger than the tear to the wrong side of the
garment.
Decrease stitch length to 0.6 – 0.8.
Begin sewing above the tear. Stitch down the middle,
pulling edges together. Stop sewing just beyond end
of tear. Depending on the tear, you might need to
stitch area 2 or 3 times.
q we
… 54 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elna eXperience 520S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elna eXperience 520S in the language / languages: English, German, French as an attachment in your email.

The manual is 3,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info