703992

Elna eXperience 520S Manual

52
Zoom out
Zoom in
Previous page
1/100
Next page
46
q we
Satin Stitch Applique
Machine Settings
q Pattern: #08
w Presser foot: Satin stitch foot F
e Needle thread tension: 2
r Presser foot pressure: 2
q we
Simple zigzag stitching is used for finishing raw
seam edges (overcasting) on most woven fabrics
to prevent fabric from unraveling. This is the
fastest way to finish an edge.
When overcasting with the zigzag foot, carefully guide
the fabric so the needle falls off the edge when it
swings to the right.
Overcasting with Zigzag Stitch
Machine Settings
q Pattern: #08
w Presser foot: Zigzag foot A
e Needle thread tension: 3–7
The zigzag stitch is commonly used for applique,
monogramming, stems of flowers and petals. (A short
zigzag stitch length creates the satin stitch.) Threads
of 100% cotton, rayon or silk provide the best results.
* Apply stabilizer to the fabric for the stitch to form
correctly.
Decrease stitch width to 3.5 and stitch length to 0.4.
Applique Preparation
1. Press fusible webbing to the wrong side of a light-
weight fabric.
2. Cut out design shape. Fuse design to main fabric.
3. Sew design to fabric with the needle swinging off
the applique.
4. When you reach a place where you need to turn,
lower the needle into the fabric at the outer edge
of the turn. Raise the presser foot, turn fabric,
lower the presser foot and continue sewing. You
may need to set the foot pressure dial to 2.
r
… 52 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elna eXperience 520S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elna eXperience 520S in the language / languages: English, German, French as an attachment in your email.

The manual is 3,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info