Manual Elna 344 (page 63 of 77) (English, German, French, Italian)

631179

Zoom out

Zoom in

1/77

Stop sewing when you reach the end of the

fabric, leaving the needle in its highest position.

Raise the presser foot. Gently remove the

stitches from the stitch finger. Turn fabric. Align

the sewn stitches with the needle. Lower the

presser foot and pull up on the needle thread to

remove any slack. Sew.

Overlocking Outside Corners

1. Clip the inside corner

approximately 4 mm (1/4”).

2. Fold the fabric into a straight edge

and sew along the edge. The

movable cutting blade should barely

trim along the fabric edge.

3. Unfold fabric and press it.

If you are overlocking and trimming at the same

time, you should cut the fabric by hand at each

corner along the stitching line for about 3 cm

(1 1/2”) before turning the fabric. Make the cut to

each corner before sewing begins.

Overlocking Inside Corners

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Elna 344 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,94 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Elna 344 Manual

Product: