Manual Elma 6400 LCR Meter (page 43 of 48) (English, Danish, Swedish, Norwegian)

668433

Zoom out

Zoom in

1/48

Elma 6400

to help aid in the use of some functions and features,in which can help the user

gain optimal and accurate measurement results.

8-1 Selecting Test Frequency

Test frequency can greatly affect the results of measurement reading,especially

when measuring inductors and capacitors. This section provides some

recommendations and suggestions to consider.

Capacitance

When measuring capacitance selecting, the right frequency is important in

obtaining the most accurate measurement results. Generally,a 1 kHz test

frequency is used to measure capacitors that are 0.01 µF or smaller. For

capacitors that are 10 µF or larger, a lower frequency of 120 Hz is used. Following

this trend,high test frequencies are best for testing very low capacitance

components. For large capacitance components, low frequency would be optimal.

For example, if the capacitance of the component is to be in the mF range, than

selecting 100 Hz or 120 Hz for test frequency would give much better results. The

results will also be obvious because if the same component was tested with 1 kHz

or 10 kHz, the measured readings may look erroneous on the display. In all cases,

it is best to check with the manufacturer’s data sheet in order to determine the

best test frequency to use for measurement.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Elma 6400 LCR Meter in the language / languages: English, Danish, Swedish, Norwegian as an attachment in your email.

The manual is 0,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Elma 6400 LCR Meter Manual

Product: