668433
35
Zoom out
Zoom in
Previous page
1/48
Next page
Elma 6400
35
5. Powering Instrument
Before beginning to operate the instrument, a power source is necessary for it to
turn on. Installing Battery
5-1 Installing Battery
The LCR meter use battery to provide power to the instrument so that it can be
portable. It use six standard 1.5V size batteries.
• Place the meter upside down. Open up the back-flip stand, and
locate the screw that tightens the battery compartment cover.
Use a screwdriver to unscrew and remove the cover.
• Insert six 1.5V batteries into compartment. Note the positive
(+) and negative (-) terminals as indicated inside the battery
compartment. Be sure to insert the battery with matching
polarity.
• Place the battery compartment cover piece. Place screw at the
bottom of the cover piece and tighten down with a screw driver.
• Push and hold down the button for 2 seconds to turn on
the instrument.
5-2 Low Battery Indication
The LCR meter has a battery indicator to notify the user when to replace
battery. When it displays ,the battery voltage is below normal working
voltage. In this case,accuracy of the meter will also decrease. It is recommended
that the battery be replaced as soon as possible before continuing operation.See
"Installing Battery" for instructions.
6. Operation Instructions
Push key function allowed to be active will be marked as ""
Keypads FUNC HOLD Dqθ S/P BKLIT
SORT
FREQ
REL%
AUTOLCR
L
C
ACR
DCR
• Power ON/OFF
When LCR power on,all of the LCD segments will be ON for 2 seconds. Then the
default initialization process will be started. The default mode is AUTOLCR smart
mode and the default test frequency is 1 kHz.When the PWR_KEY is pushed
during power-on mode,the meter will enter power-off mode.The LCD will show the
"OFF" state before the whole system enters the power off status.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elma 6400 LCR Meter at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elma 6400 LCR Meter in the language / languages: English, Danish, Swedish, Norwegian as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info