741486

Elkron MP110M Manual

14
Zoom out
Zoom in
Previous page
1/20
Next page
(((ELKRON)))
MP110 USER MANUAL
(((ELKRON)))
MP110 USER MANUAL
6.Clock Setting
6.1
Hours/Minutes Modification
1. Enter MASTER code.
2. Press in sequence
F
and
8
; the display will show the characters
“ ” flashing to show the introduction of the hours.
• Enter a value between 00 and 23 ( 2 digits required). The display will
show the entered data in a fixed mode.
• The display will show the characters “ ” flashing to show the
introduction of the minutes.
• Enter a value between 00 and 59 ( 2 digits required).
• To confirm and store the entered time, press key
F
.
• Before storing the entered time, the entered data are controlled. In case
of inconsistency, an error beep is generated, you quit without modifying
the data and the display will show the characters “ ” flashing to
show a new data introduction. In case of correct data, the new time is
stored and the positive result of the operation is confirmed by an OK
beep. When quitting by timeout, the modification is not saved.
6.2 Date Modification
1. Enter MASTER code.
2. Press in sequence
F
and
5
.
• The display will show the characters “ ” flashing to invite the user
to enter the day of the month.
• By means of the numeric keys enter the date of the desired day (2 digits
from 0 to 31).The display will show the number of the chosen day in a
fixed mode.
• The display will show the characters “ ” flashing to show the
introduction of the month.
• Enter a value from 01 to 12 (2 digits).
• Use the
1
key for forwas EXCLUDED sensor selection
Use the
2
key for backward EXCLUDED sensor selection
Use the
2
to return to the beginning of list
• Press
F
to exit programming
27
1. Enter MASTER code +
F
+
9
+
3
.
2. The keypad display will visualize the following message:
TEST CALL.
3. Press key
3
to start procedure.
The keypad display will visualize the following message:
TEST IN PROGRESS…..
4. At the end of the test, you exit automatically from the procedure.
9. Telephone Line Test
5. Confirm the choice of the telephone number by key
O
:
instead of the number, the display will show some dashes “-------------”
6. By means of the numeric keys, enter the desired number. Every dash
“-“ is replaced by the desired digit. To introduce a pause, press
C
**
followed by a number key corresponding to the length of the desired
pause: the chosen pause will be visualized on the dash following the
last entered digit. It is possible to cancel a digit by pressing key
E
.
7. Press key
O
to confirm and save the number entered. The
buzzer generates a double beep to confirm the operation and you go
back to point 3.
8. If you want to program or cancel other numbers, use keys
1
and
2
to go to the desired number and proceed as described from
point 5 onwards.
9. To cancel a previously programmed telephone number, press key
O
twice, when the telephone number to be cancelled is
visualized, the buzzer generates a double beep to confirm cancellation.
10.Press key
EXIT
F
to exit.
AVAILABLE PAUSES
C
**
, 1 = 1sec. ----> A
C
**
, 5 = 5sec. ----> B
C
**
, 9 = 9sec. ----> C
14
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elkron MP110M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elkron MP110M in the language / languages: English as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Elkron MP110M

Elkron MP110M User Manual - German - 32 pages

Elkron MP110M User Manual - French - 120 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info