Manual Elkron MP110M (page 20 of 20) (English)

741486

Zoom out

Zoom in

1/20

(((ELKRON)))

MP110 USER MANUAL

(((ELKRON)))

MP110 USER MANUAL

1. Enter the MASTER user code.

2. Press the

EXIT

key and then press the

key twice. The number

5 appears on the display (user 5 code).

3. Press key

to select another code to be enabled/

disabled: the selected code will appear on the display.

4. The zones controlled by the code under consideration are indicated

by leds 1, 2 and 3.

Led ON = zone controlled by the code under consideration

Led OFF = zone not controlled by the code under consideration

5. To change the association displayed, press the

key (the

associated sectors led blink) and use keys

(corresponding to zones S1, S2, S3) to combine (associate) or not

combine (associate) the desired zones to (for) the user in question.

The associated zone is indicated by the flashing of the corresponding

led; if the led is OFF, it means that the corresponding zone is not in

operation (for the code under consideration).

6. Once configuration of the the code under consideration is completed,

press the

key the blinking led will lit up fixed.To change the

association of the zones of a different code, proceed as indicated in

step 3.

7. Press

again if one wishes to terminate the operation and store

the selections made.

Press the

EXIT

key to exit.

2.3 Enabling/Disabling of User Codes

5, 6, 7 and 8 and codes/sectors

association

associates zone 1

associates zone 2

associates zone 3

zone 1

zone 2

zone 3

2.1 Changing Personal Code

1. Type in the access code that is to be changed. The buzzer beeps

twice to confirm that it is correct, otherwise it indicates an error with a

long beep.

2. Press the

key. The character , lit with a fixed light, appears

on the display.

3. Enter the new code .

The flashing character is displayed.

4. Enter the new code a second time.

If the new code has been correctly entered, it is accepted and this is

confirmed when the buzzer beeps twice; otherwise, an error warning

is given and the system exits the procedure.

Example of code change

- The master user wishes to change the factory code 1-11111.

- Type in 111111 on the keypad and press the

key, the character

lights up with a fixed light.

- Enter the new code, for example, 165744. The on the display

begins to flash, and re-enters the numbers 165744.

- The code is accepted when the buzzer beeps twice.

2.2 Enabling/Disabling the User 2, Engineer’s,

Telemonitoring and Key Codes

1. Enter the MASTER code.

2. Press the

key followed by the

key. A flashing line appears

on the display.

It is now possible to enable/disable the engineer’s code, the

telemonitoring code, the User 2 code and the key code. These 4 codes

are associated with the 4 leds present on the keypad:

ENGINEER

TELEMONITORING

USER 2

KEY CODE (EK)

3. Press the key next to the led for enabling/disabling the corresponding

code.

4. Press the

EXIT

key to exit the procedure.

The leds respectively indicate the

status of the codes:

Led ON = Code enabled

Led OFF = Code disabled

The key code cannot be

changed: when enabled, it

allows use of the electronic

keys and of the commutators.

When disabled, it prevents

the operation of all the

commutators and of existing

keys (only system status will

be displayed by the

commutators’ leds).

KEY

CODE

Note: the first number

of the code must be the

user’s identification

number:

1 for master user

2 for user 2

3 for engineer

4 for telemonitoring

5 for user 5

6 for user 6

7 for user 7

8 for user 8.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Elkron MP110M in the language / languages: English as an attachment in your email.

The manual is 0,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Elkron MP110M

Elkron MP110M User Manual - German - 32 pages

Elkron MP110M User Manual - French - 120 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Elkron MP110M Manual

Product: