741484
6
Zoom out
Zoom in
Previous page
1/20
Next page
(((ELKRON)))
MP110 USER MANUAL
(((ELKRON)))
MP110 USER MANUAL
2.4 Check of Stored Keys
1. Enter the MASTER USER code on th ekeypad and press keys
F
+
7
in sequence.
2. Press the
1
key several times until the following message appears
on the display:
• keypad with alphanumeric display:KEY CHECK
• keypad with segmented display:
C
(flashing”)
3. Press the
7
key. Commutator led 2 flashes slowly to indicate
system standby for entry of the key to be checked.
4. After entering the key to be checked, if its code corresponds to the
stored code, leds 1, 3 and 4 of all the devices will indicate the controlled
zones. The number of the entered key appears on the segmented
displays, while the alphanumeric display indicates the message “KEY
NUMBER nn”, where “nn” corresponds to the number of the key that
is read.
If the key code entred does not correspond to the stored code, all
zone leds will flash quickly and the message “UNKNOWN KEY”
appears on the alphanumeric displays. Flashing will continue until the
key is removed.
Press key
F
to exit.
35
1. Enter the User 1 code.
2. Press the
F
key and then press the
C
**
key twice; the message
“AUX CODE 05” appears on the display.
3. To choose another user code to be enabled/disabled (either 5, 6, 7 or
8), press key
1
or
2
.
4. The system zones controlled by the code being consideredare
displayed by leds 1, 2 and 3.
Led ON = zone controlled by code
Led OFF = zone not controlled by code
For example, if all 3 leds are ON, this means that the user under
consideration can arm or disarm the entire system; if only led 1 is lit,
it means that the user can manage only zone 1.
5. To change the combination displayed, press the
C
**
key (associated
sector leds blink) and use keys
1
,
2
,
3
(corresponding to
zones S1, S2, S3) to associate or not associate the desired zones
with the user in question. The associated zone is indicated by the
flashing of the corresponding led; if the led is OFF, it means that the
corresponding zone is not in operation.
6. Once configuration of the code under consideration is completed, press
the
C
**
key. The leds of the associated zones will light up with a
fixed light..
7. To change the association of the zones, continue as indicated in item
3.
8. To terminate the auxiliary codes enabling/disabling operations, and to
store the selections made, press the
C
**
key twice and then press
the
EXIT
F
key to exit programming.
2.3 Enabling/Disabling of User Codes
5, 6, 7 and 8 and codes/sectors
association
associates zone 1
associates zone 2
associates zone 3
zone1
zone 2
zone 3
3
2
1
3
1
2
3
6
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elkron MP110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elkron MP110 in the language / languages: English as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Elkron MP110

Elkron MP110 User Manual - German - 32 pages

Elkron MP110 User Manual - French - 120 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info