741400

Elkron IT500CLOUD Manual

5
Zoom out
Zoom in
Previous page
1/16
Next page
IT500CLOUD 5
ENGLISH
GENERAL DESCRIPTION
WARNING: This document contains important information on the product for installing, configuring
and updating the software. For more detailed information, see the My Elkron Family App
installation manual, which can be downloaded from the www.elkron.com website.
WARNING! The IT500CLOUD interface is only compatible with the MP500/8 control panel with
versione1.10 or later.
The IT500CLOUD interface is an optional device, which can be used to remotely manage the
MP500/8 control panel using a mobile device and/or tablet via a modem router.
The device can be connected to the LAN network in two ways:
• WiFi
• Ethernet (cable)
Make sure you can connect to the Internet through the home network.
From a mobile device and/or tablet you can:
• Totally or partially arm the system.
• Totally or partially disarm the system.
• Receive notifications of any alarms.
• Check the status of the alarms and their details in real time.
• Check the status of operation of the system in real time.
• Read the contents of the control panel history.
• Exclude/Include any intrusion inputs.
• Activate/Deactivate any outputs programmed as commandable.
WARNING! Before proceeding with installation, configuration and
functional tests, a mobile device (Smartphone or Tablet) must be available
to install the dedicated App - My Elkron Family, available and
downloadable from the Play Store or App store.
In order to install and use the application you must have:
for Android devices, version 5.0 or higher / for IOS devices, version 10.0 or
higher.
The module can be installed in three different ways:
• Inside the MP500/8 control panel in a special location (see Fig. 3)
• Wall-mounted with screws and plugs (see Fig. 2) using the ABS box model CP/EP500.
• In a flush-mounting box
Place the device in a place:
• At a height not exceeding 2 metres from the floor.
• Not subject to excessive fluctuations in temperature.
• Protected by the burglar alarm system.
• Away from strong electromagnetic fields.
If you have chosen to connect the device to the home network via WiFi, check that there is
sufficient range.
If you have chosen to connect the device to the home network through a cable (Ethernet):
• In the case of using the box CP/EP500 with the aid of a special tool, (see Fig. 2 point 3)
make an opening on the cover for the passage of the Ethernet cable (connector).
• Prepare everything you need to connect the Ethernet cable to an appropriate connector of
the device (see Legend Fig. 1 - F)
If it is not located in the box CP/EP500, the tamper must be excluded by positioning the DIP4 in
the ON position (see Legend Fig. 1 - C).
My Elkron Family
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elkron IT500CLOUD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elkron IT500CLOUD in the language / languages: English, French, Italian as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info