741440

Elkron HPA703XP Manual

29
Zoom out
Zoom in
Previous page
1/44
Next page
29/44 HPA703XP
4.0 FLASHLIGHT MODULE
On the siren a flashlight module in LED technology is assembled, that joins together a longer time and
reduced consumptions, allowing a longer battery autonomy. The module has two additional signalling LED
available.
The System Status RED LED signals the TC signal logic condition:
Off: TC signal present, inactive system;
Blinking : TC signal absent, active system;
The Failure YELLOW LED shows the storage of the first detected
anomaly in a chronological order (only with TC signal present,
namely with inactive system) by means of a short blinking every 2 s.
It is possible to obtain the detail about failure types (that are signalled
by different blinking), by keeping the “TEST” jumper (present on the
siren module – see paragraph 3.0) short-circuited.
The table shows the different blinking and their meaning.
Memory deletion occurs with the following TC transition (system
activation).
Note: if such luminous signalling are not wanted, disconnect the respective wires from terminals L1 and L2 of
the siren module (see paragraph 3.0).
5.0 PROTECTION MODULE
The siren is equipped as series with a protection module managed by a microprocessor that is able to detect
tampering attempts with foam (detection from both optical circuits is needed), drilling (electrical contacting
between the two cages), thermal attacks (fixed threshold in combination with thermal-speed analysis).
Number of
blinking
Meaning
1
Battery discharged
2
Failed horn
3
Failed flash
4
Failed protection
module
LED
WHITE
YELLOW
--GREEN
BLUE
BLACK
RED
NC contact output
Red LED
Yellow LED
L1 - WHIT
E
+ P - RED
L - BLACK
L2 - YELLOW
Is recommended to connect the
protection module output serially with
the tamper-preventing contact or to an
“24h” input in the central unit.
TX and RX elements of foam-preventing protection
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elkron HPA703XP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elkron HPA703XP in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info