741440

Elkron HPA703XP Manual

28
Zoom out
Zoom in
Previous page
1/44
Next page
28/44 HPA703XP
3.3 SOUND TIME OUT PROGRAMMING
This function allows programming the maximum delay after which, should the
block signal go on missing, the siren automatically stops (useful function in case
of cable cutting).
The siren will generate a new alarm cycle with a following lack of the block signal.
Programming is performed through jumpers E and F, according to the table.
3.4 INPUT TYPE PROGRAMMING
This function allows programming BL and TC inputs, of the normally closed or
balanced types (6K8 +/- 5%).
Programming is performed through jumper G, according to the table.
3.5 INPUT REFERENCE PROGRAMMING
This function allows programming the reference of BL and TC inputs to positive or
negative.
Programming is performed through jumper H, according to the table.
3.6 ALARMS COUNT PROGRAMMING
This function allows programming a max number of 5 alarms within 24h, or allows
excluding the count, namely upon every block absence, an alarm will be
generated.
An alarm is taken into account only if its length is more than 24 seconds.
The count is reset upon every system deactivation or every 24h
NOTE: if the option of 5 alarms within 24h is chosen, the TC connection is
mandatory.
Programming is performed through jumper I, according to the table.
3.7 SCAFFOLDS FUNCTION PROGRAMMING
This function activates the flash blinking (one blink every 2.5 s) with active system
(namely when the signal is not present on terminal TC).
NOTE: if the scaffolds function is enabled, the TC connection is mandatory.
By activating such function, there is not the alarm memory any more.
WARNING: under low battery conditions, the flash blinking is deactivated, in order
to save the remaining charge.
Programming is performed through jumper L, according to the table.
E
F
Sound
Time-out
3 minutes
6 minutes
9 minutes
30 minutes
G
Input Type
Balanced
Normally closed
H
Input Reference
To positive
To negative
I
Alarms Count
Disabled
Enabled
L
Scaffolds Function
Disabled
Enabled
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elkron HPA703XP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elkron HPA703XP in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info