741408
16
Zoom out
Zoom in
Previous page
1/24
Next page
16/24 HP375M
TECHNICAL FEATURES
Rated supply voltage............................................................................ 14.4 Vdc
Operating voltage ................................................................................. 13.8 Vdc ÷ 15 Vdc
Battery operation minimum and maximum voltage ............................... 10.5 Vdc ÷ 13.8 Vdc
Standby current sink ............................................................................ 3 mA @ 12 Vdc
Max current in alarm ............................................................................ 2.2 A (power tone)
Max ripple allowed ............................................................................... 500 mV
Acoustic pressure (power tone) ............................................................ 116 ± 1 dB (A) @ 1 m
Working frequency ............................................................................... 1700 Hz (intermittent tone AL2)
2000-3000 Hz (power tone)
AL1, AL2 and S blocking signal inputs (ref. to positive) ........................ 7.3 Vdc
AL1, AL2 and S blocking signal inputs (ref. to negative) ....................... 4.8 Vdc
Current sink of AL1, AL2 and S inputs ................................................. 2 mA
Max central unit absorption .................................................................. 150 mA
Anti-opening/anti-removal micro-switch ................................................ 1 A @ 24 Vdc
Operating temperature certified ............................................................ -25°C +55°C
Max permitted humidity ........................................................................ 93%
Environmental class ............................................................................. II
EN50131-4 certification ........................................................................ Grade 2
Case protection degree ........................................................................ IP30 / IK06
Case .................................................................................................... steel zinc plated and painted
Anti-tamper protection .......................................................................... opening and removing
Compatible accumulator type ............................................................... 12V from 2 to 2.2 Ah
Internal battery autonomy in stand-by condition ................................... > 36 hours
Internal battery autonomy in alarm condition ........................................ >30 minutes
Type of connecting cable ..................................................................... 3-pair shielded cable (0,22mm
2
)
Dimensions (w x h x d) ......................................................................... 195x180x55 mm
Weight (without battery) ....................................................................... 1300 g
NOTES CONCERNING EN50131-4 CERTIFICATION
Importantly, jumper C must be kept intact to allow the siren to sound in case of remote power blackout for
the compliance to EN50131-4. Cutting this jumper will cause loss of compliance.
The intermittent sound (control AL2) is an auxiliary signal (it must not be used for burglar and/or tamper
alarm indications).
Note:
The batteries are considered dangerous waste (E.W.C.
160601) and they must be given to an authorised waste
disposal.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elkron HP375M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elkron HP375M in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info