741458
87
Zoom out
Zoom in
Previous page
1/248
Next page
DS80TC1L-001 87
Advice for correct auto tracking use
General warnings
The tracking function should mainly be used in indoor environments. Outdoor use is highly problematic: the
variety of objects (leafs, flags, litter, etc.) which may be moved by the wind makes use unreliable.
Provide the best lighting possible in the detection zone: in poor lighting conditions, the inevitable presence of
noise on the image makes greyscale variations extremely critical. In poor lighting conditionsELKDome may
easily loose the tracked object..
If IR illuminators are use, remember that:
o la ELKDome must be programmed to operate in B/W because the Slow Shutter will make tracking
unreliable in colour mode.
o the lighting entirely covers the frame where motion is tracked, possibly by restricting the range of
action of the ELKDome in Tracking mode.
Avoid background objects in the frame which could trick the motion detector, such as for example Venetian
blinds, gates, doors with grid and objects with very marked, contrasting contours. A chequerboard background
is certainly the worst condition for satisfactory operation.
Do not use the privacy zone function in frames where auto tracking is used: the privacy zone can trick the auto
tracking function.
Do not use the auto tracking function if the object to be tracked and/or monitored moves too fast.
Take into account the fact that, during day/night switching, tracking may be affected by the sudden change of
viewing from colour to B/W.
Similarly, in very poor lighting conditions, the presence of greater image noise may also affect tracking
reliability.
In both cases, the TARGET LOST SETUP option permits automatic restore of the correct operating conditions in
the case of loss of the target object.
Recommended control parameters
TARGET SIZE: select SMALL particularly in poor lighting conditions to improve performance.
SENSITIVITY: most false alarms are caused by the tracking of unexpected objects. For this reason, it is preferable to
select low sensitivity.
ZOOM SETTING: it is advisable to use the lowest possible zoom values. Excessive detail makes object tracking difficult
(the movement must be fastener and consequently the risk of loosing the object is much higher).
WAIT TIME: particularly, in the case of poor lighting conditions or frames with interference, it is preferable to set the
lowest possible time to prevent the ELKDome from constantly tracking unexpected objects (e.g. “video noise” in the
frame).
TRACKING SPEED: the AUTO setting should always be preferred, unless the object to be tracked does not always
move at low, constant speed.
BOUNDARY LIMIT: it is strong advised to delimit the tracking zone, avoiding to include unnecessary parts in the frame.
87


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elkron 80TC1L00133 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elkron 80TC1L00133 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 5,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info