741458

Elkron 80TC1L00133 Manual

80
Zoom out
Zoom in
Previous page
1/248
Next page
DS80TC1L-001 80
4.5.5.5 MASKING ZONE submenu of FUNCTION PROGRAMMING menu
The ELKDome camera allows to define up to 8 Privacy zones max., that hide certain parts of the scene from the
operator.
A Privacy Zone is displayed as a coloured rectangle associated to a certain position of camera Pan,Tilt and Zoom.
Option Value Explanation
NUMBER 1/8
This option allows to select the zone number to be masked. This
operation is allowed for 8 zones max.
With the joystick set the zone number to be stored.
MASK EDIT
This option allows to define the zone where to activate the masking of
the images displayed on the monitor. By framing the zone central point,
in the sector to be masked, with the joystick and by pressing IRIS+ is
selected the central point used to extend the masking area (zone). It is
possible to change it by pressing the buttons FOCUS + and FOCUS - to
adjust the height and IN and OUT to adjust the width (see below).
MASK DISPLAY ON/OFF
If enabled (ON), the masked sector becomes active and disables the
image viewing.
PROCEDURE
• Point the MaskiZone item with the joystick and select it.
• The following screen will appear.
• Point the Mas Edit item with the joystick and select it.
• A cross-shaped pointer will appear on the monitor: this pointer will correspond to the middle of the privacy
zones being created.
• Point the cross-shaped cursor to the required position by moving the joystick in the vertical and horizontal
directions.
• Press IRIS+. A square will appear on the monitor (with the previously defined features).
• Use the joystick to obtain the required dimensions of the privacy zone.
o Zoom+ to increase the left and right edges of the blanking zone
o Zoom- to decrease the left and right edges of the blanking zone
o Far to increase the upper and lower edges of the blanking zone
o Near to decrease the upper and lower edges of the blanking zone
• Once you reach the desired size, press il tasto IRIS+ key to confirm.
• At this point, either select a new privacy zone or select IRIS- to quit the menu
WARNING!
It is preferable to set the privacy zones with a zoom level of 1x.
It is not possible to set the Privacy zone with Tilt coordinate higher than 70.
MASK ZONE
1 Number 1
2 Mask Edit
3 Mask Display
MASK ZONE
1 Number 1
2 Mask Edit
3 Mask Display
… 80 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elkron 80TC1L00133 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elkron 80TC1L00133 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 5,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info