Manual Elica Loop (page 23 of 76) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

649907

Zoom out

Zoom in

1/76

An aesthetic flue can be purchased as an optional accessory.

Check with the assistance centre whether the model in your

possession envisages this possibility.

We advise installing the hood after having purchased the flue

to check with certainty the most suitable installation.

Operation

Automatic operation (sensor) e

connection with SNAP

Button ON/OFF lighting

Press briefly to turn on or off the hob

lighting.

Press and hold to adjust the tonality

of light.

Button to select high speed

(suction power):

- first touch

Button to select intensive speed

(suction power):

- second touch

Intensive speed (suction power) has

a duration of 5 minutes, then the

hood returns to medium speed

(suction power); the button flashes.

Note: pressing again the hood goes

back to high speed (suction power).

Button to select medium speed

(suction power):-

Button to select low speed (suction

power):- when flashing, it indicates

you must wash the grease filter.

Button OFF motor (stand by)

Filter Saturation Indicators

At regular intervals the hood signals the need to perform filter

maintenance.

Button

on continuously: perform maintenance of

grease filters.

Button

on with flashing light: perform maintenance

on the activated charcoal filter

Note: The filter saturation indicator is visible within the

first minute after the hood switching off; the reset of

saturation indicators must be performed within this time

interval.

Reset filter saturation indicators:

Press and hold button

Activation of saturation indicator for activated

charcoal filter

Note: this operation is to be performed with the hood off.

This indicator is normally disabled; press and hold button

to activate the function; the button turns on with

steady light.

To deactivate the function, press and hold button

the button turns on with flashing light.

Automatic operation (sensor), connection with SNAP

Attention! Proper functioning of the hood depends on the

‘Setting of Parameters for Automatic mode’ (see relevant

paragraph)

Automatic operation (sensor)

Press button

(the button turns on in white).

The hood turns on at the most appropriate speed according to

the cooking fumes detected by the sensor on the hood.

Automatic operation of the hood with SNAP

Press button (the button turns on in orange to indicate

that the hood can operate automatically with SNAP

Note: SNAP

is a unit of auxiliary suction capable of

operating together with the hood. For more information,

consult the manual supplied with the SNAP®

Setting of parameters for Automatic Operation

Note: All calibration, selection, control and logical

connection operations described below are possible with

the hood off (OFF).

Parameter setting is regularly done automatically

whenever the hood is reconnected to the power grid (eg:

first installation or after a blackout) or manually

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Elica Loop in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,42 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Elica Loop Manual

Product: