707569
9
Zoom out
Zoom in
Previous page
1/32
Next page
9
INSTALLATION MANUAL
6.3 Building the Fireplace
Construct a studwork fireplace to the desired sizes, minimum
sizes are shown in figure 6.1. Any combustible material used to
construct the Fireplace must not be closer than the minimum
dimensions quoted in table 6.1.
The appliance should be fitted with a minimum clearance
of 100mm (G in figure 6.2) from any combustible objects or
materials; this includes any combustible materials used for the
fireplace construction. This clearance distance can be reduced to
50mm if a cement Board, e.g. promatec, of minimum thickness
12mm is used. This cement board will act as a thermal break.
The clearance distance of the flue from combustibles must not
be less than 75mm (I in figure 6.3).
Cement board can be used directly against the Frame Face on
the appliance.
Do not use insulation material (or other) to pack the void around
or above the appliance.
6.4 Flue Connection
6.4.1 General notes
This appliance may be installed with a roof termination with a
rigid or flexible pipes, or in a masonary chimney class 1 or class 2
and without lining the flue. The flue system must be constructed
from the appliance upwards, with all joints being fully locked
and sealed.
6.4.2 Timber Frame Construction
Whilst it is possible to install room-sealed appliances in timber
frame properties, great care needs to be taken to ensure that
the flue assembly does not interfere with the weatherproofing
qualities of any outer wall which it may penetrate. Before
attempting this work, it is advisable to consult with a qualified
installer.
6.4.3 Carport or Building Extension
Note: A covered passageway should not be treated as a carport.
Flues should not be sitedin a covered passageway between
properties.
G
H
H
Figure 6.2 - Top view of the fireplace installed in the chimney
I
Figure 6.3 - Area around the flue pipe.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Element4 Cupido 60 CF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Element4 Cupido 60 CF in the language / languages: English as an attachment in your email.

The manual is 8,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Element4 Cupido 60 CF

Element4 Cupido 60 CF User Manual - English, German - 56 pages

Element4 Cupido 60 CF Installation Guide - Dutch - 36 pages

Element4 Cupido 60 CF User Manual - Dutch, French - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info