629290

Electronics Line Prime Manual

26
Zoom out
Zoom in
Previous page
1/32
Next page
-26-
Sounder Tests
To test the external wireless sounder:
• From the Service menu, select WL Sounder Test [703]; the wireless sounder is
sounded briefly.
To test the built-in sounder:
• From the Service menu, select Sounder Test [704]; the built-in sounder is sounded
briefly.
Interface Test
The Interface test enables you to check if the speaker, LEDs and LCD are
functioning correctly.
To test the system interface:
• From the Service menu, select Interface Test [705]; a short sequence of
chimes are sounded from the speaker, all LEDs flash and the LCD is tested on
all connected LCD keypads.
Walk Test
Walk Test mode enables you to test all the sensors registered to your system without
triggering an alarm.
To initiate Walk Test mode:
1. From the Service menu, select Walk Test [706]; a list of registered sensors appears.
2. Trigger each sensor; when the system receives a successful transmission from
a sensor, the sensor is removed from the list.
3. When all the sensors are removed from the list, End Walk Test is displayed.
Transmitters
The Transmitters menu offers two utilities, TX List and TX Test.
The TX List comprises all registered transmitters and their last reported status.
To view the TX list:
1. From the Service menu, select Transmitters, TX List [7071]; the first transmitter
on the list is displayed.
2. Using the arrow buttons, scroll through the transmitter list.
3. When you have finished viewing, press X to exit the list.
The TX list displays the following information for
each transmitter:
The transmitter’s descriptor
The signal strength of the last received
transmission
An abbreviation indicating the last received
status of the transmitter.
This Means
OK The transmitter is functioning correctly
TA Tamper condition
Notify
your
engineer
BT Battery low
OS The transmitter is out of
synchronization
NA The transmitter is inactive
ΦΡΟΝΤ ΔΟΟΡ
Σ=6 ΟΚ
Press this key to
display the transmitter’s
default descriptor .
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Electronics Line Prime at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Electronics Line Prime in the language / languages: English as an attachment in your email.

The manual is 0,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info