573742
14
Zoom out
Zoom in
Previous page
1/100
Next page
14 www.electrolux.com
SLEEP OPERATION:
In this mode the selected temperature
will increase by 1 °C 30 minutes after
the mode is selected. The temperature
will then increase by another 1 °C after
an additional 30 minutes. This new
temperature will be maintained for 7 hours
before it returns to the originally selected
temperature. This ends the “Sleep” mode
and the unit will continue to operate as
originally programmed. The “Sleep” mode
program can be cancelled at any time
during operation by again pressing the
“Sleep” button.
Note: This feature is unavailabe under
FAN or DRY modes.
SWING OPERATION:
When you turn on the unit, the louver will
swing and stop at a certain angle. You can
press the SWING button to let the louver
swing automatically. Press the SWING
button again while you want the louver
stop at desired angle.
POWER MANAGEMENT FEATURE:
When the ambient temperature reaches
the setting temperature, after a period of
time the unit will automatically switch to
power management mode. The power
management indicator light “
“ will
illuminate and the unit will be turned off.
When the ambient temperature varies from
the setting temperature, after a period
of time the unit will automatically quit the
power management mode. The indicator
light will be turned off and the unit will be
turned on again.
FAULT CODE:
If the display reads “E1”, the room
temperature sensor has failed. Call for
service.
temp/timer setting
If the display reads “E2”, the evaporator
temperature sensor has failed. Call for
service.
temp/timer setting
If the display reads “E3”, the condenser
temperature sensor has failed. Call for
Service.
temp/timer setting
If the display reads “E4”, the display panel
communication has failed. Call for Service.
temp/timer setting
If the display reads “P1”, bottom tray is
full. Carefully move the unit to a drain
location, remove the bottom drain plug
and let the water drain away. Restart the
machine until the “P1” symbol disappears.
If error repeats, call for Service.
temp/timer setting
DRAINAGE:
1. During the dehumidifying mode, you will
need a garden hose (sold separately)
to drain the condensate from the unit.
Remove the rubber stopper from
the hose connector, then screw on a
garden hose to the connector as shown
on Fig.25.
The hose may then:
A. Discharge into a drain that is lower than
the unit.
B. Be connected to a condensate pump
(sold separately).
Fig. 25
Garden hose
Remove the
supplied rubber
stopper
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Electrolux EXP12HN1WI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Electrolux EXP12HN1WI in the language / languages: English, German, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 5,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Electrolux EXP12HN1WI

Electrolux EXP12HN1WI User Manual - German - 20 pages

Electrolux EXP12HN1WI User Manual - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info