11
ENGLISH
Water Hardness
You can change the water hardness choosing 3
different degrees (see the chapter «Adjusting the
level of conductivity» on page 5).
Language
You can change the language setting if you
would like the indicators in the display to appear
in a different language.
Example:
1. Enter the Menu option and select the
Language setting.
2. Press the “Wijzigen” button to select the
desired Language.
Clock
The clock setting permits you to modify/set up
the current time. It is important to keep it
updated as the current END Cycle Time
depends on it.
Example:
1. Enter the Menu option and select the Clock
setting.
2. With a short/single time press of the
“Wijzigen” button, the time varies minute by
minute. With a continue pressure of the
“Wijzigen” button, the time varies 10
minutes by 10 minutes.
Contrast
The Contrast setting allows you to modify the
optical characteristic of the display.
Example:
1. Enter the Menu option and select the
Contrast setting.
2. Use the “Wijzigen” button to set up the
desired contrast level.
Brightness
The Brightness setting allows you to modify the
backlight intensity of the display.
Example:
1. Enter the Menu option and select the
Brightness setting.
2. Use the “Wijzigen” button to set up the
desired brightness level.
Note:
At the end of the programme if no button is
pressed for approximately 10 minutes the
backlight intensity goes off.
