569725
28
Zoom out
Zoom in
Previous page
1/192
Next page
Commissioning
Air pressure switch
26
Adjustment Air pressure switch
Connect a pressure gauge to the indi-
cated measuring points on the switch
(1). Start the boiler at service mode for
minimum load operation (W1). Measure
the pressure differential across the
switch, this should be 0.8 mbar. Turn
the dial on the switch (2) counter-
clockwise until the end. Reduce the
setting on parameter P17 step by step
until the pressure differential is 0.4
mbar. Slowly turn the dial on the switch
clockwise until the boiler goes to lock-
out. Set P17 back to its original setting!!
Reset the lockout. Restart the boiler
and check if the switch contact closes
at 0.4 mbar (indicator at DW in display
of the boiler controller (3). If required,
repeat the above procedure.
1
2
3
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elco R3600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elco R3600 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 5,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info