Manual Elco R3600 (page 26 of 192) (English, German, Dutch, French, Italian)

569725

Zoom out

Zoom in

1/192

Commissioning

Prepare boiler for first startup

Open gas connection;

Switch on mains isolator switch for

power supply to the boiler;

Switch on boiler with on/off switch (1)

Make sure the boiler remains in

standby operation

K (2)

use rotational switch (3);

Check the pump operation: make

sure that the direction of the rotation

is correct;

Remove any air from the pump by

removing the end cap of the pump

motor housing.

It’s recommended to keep the boiler at

50% load for a while after the first

startup, as this is the easiest base for

starting the combustion analysis. This

can be assured as follows:

Open the lid of the boiler controller;

Use rotational switch (3) for going to

parameter P9

in the menu;

Change P9 (5) into 50% (push

programming button (4), change

value with rotational switch (3), push

programming button (4) to confirm);

Close the lid of the boiler controller.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Elco R3600 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 5,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Elco R3600 Manual

Product: