646319
25
Zoom out
Zoom in
Previous page
1/49
Next page
25 of 49
Commissioning
Flue gas quantity and adjustment
Maximum output
Flue gas measuring and adjustment
Switch the boiler to commisioning mode,
while keeping flue cleaner key (8)
pressed, until the red LED (3) starts to
flash (double flash). The display shows
alternately the figures 1 and 00. With Hot
Water temperature Adjustment (11)
turned fully clockwise, the boiler is
working in heating mode at 100% output.
i.e. maximum output
Wait until the boiler stabilises and then
check the combustion settings, checking
for C0
2
value in conjunction with the chart
below.
To adjust the combusution, proceed as
follows:
Remove plastic cap and then
adjust High fire (1) on gas valve
using a flat bladed screw driver:
anticlockwise to increase and
clockwise to decrease the C0
2
value. Enusre correct settings for
corect fuel type is observed.
Note: Because of the sensitivity of
the adjustment, minimum
adjustments should only be made
Wait a few seconds, until the C0
2
value has stabilised, if applicable
repeat adjustment.
24 HG
30 HSG/HG
C0
2
[%]
C0
2
[%]
G20 Natural gas H
8,7-9,1
8,8 - 9,2
G31 Propane
10,7- 11,1
10,8 - 11,2
The measurement of C0
2
values must take place with appliance casing fitted.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elco MHS - EURON 24 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elco MHS - EURON 24 in the language / languages: English as an attachment in your email.

The manual is 2,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info