561013
14
Zoom out
Zoom in
Previous page
1/36
Next page
Operating controls and connecting terminals
14
Advantages of the BASH®-technology
6. LINE LEVEL IN
Input jack for connecting the ELAC subwoofer to the subwoofer output ‘BASS / SUB OUT / LFE of a sur-
round amplifier / surround receiver or to the ’PRE OUT’ of a stereo amplifier. For this connection, a com-
mercially available cable with RCA connectors can be used. Do not plug or unplug this cable while the
subwoofer is in operation.
7. ELAC WIRELESS INTERFACE SOCKET
Input jack for connecting the optionally available ELAC wireless receiver dongle. With this dongle, your
subwoofer will become a wireless powered subwoofer. By using the ELAC wireless technology, you can
avoid installing long RCA cables through your room.
Interesting: If you don’t want to use the ELAC wireless technology, you can divert the USB socket. from its
intended use, e.g. to charge your mobile phone or mp3 player. Just connect the charging cable of your
device to this USB connector and your device will be charged.
ELAC doesn’t feel responsible for any damage which may occur on your device.
8. POWER SOCKET
Please insert the IEC end of the mains power cable here.
9. FUSE HOLDER
When replacing fuses, make sure to use appropriate fuses (please refer to the information given on the
rear of the speaker).
ATTENTION: Complete disconnection of the ELAC subwoofer from the mains is ensured only by pulling
out the power plug. The power plug or the device plug have to be easily accessible! While the device is
plugged in and the power switch is switched on, a static current will flow even in standby mode (indicated
by the LED glowing red).
The BASH® technology which is implemented in the amplifier module of the ELAC subwoofer promises
highly impressing power reserves at low distortion values. This is achieved by using an audiophile class
AB amplifier powered by a class D amplifier circuit which allows low power losses with the effeciency of a
class D amplifier. Therefore BASH® combines the advantages of both technologies in one device.
Because the music signal is amplified completely analogue, no high frequency disturbances, which are
typical for digital amplifiers, are present. All-in-all this design combines a low noise amplifier with a design
of lower electromagnetic radiation also.
The BASH® design also guarantees lower crossover distortions, which are a problem in traditional class
D designs as the power transistors can not switch at any speed.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elac SUB 2025 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elac SUB 2025 in the language / languages: English, German as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info