Manual Elac AM 180 - Active Monitor (page 20 of 24) (English, German)

561010

Zoom out

Zoom in

1/24

Connection and getting started 17

Open installation:

If the speaker is installed in an

open environment, the bass range

should not be damped. The basis

for experiments should be the de-

fault positions (ACOUSTIC SPACE

= 0 dB, HF TRIM = 0 dB, LF CUT-

OFF = FLAT).

In fairly damped rooms (e.g. with

carpets, curtains, many plants etc.)

the treble can reasonably be in-

creased by means of the HF TRIM

switch (HF TRIM = +2 dB).

Nearfield installation (e.g. on a mix-

ing console):

The settings for the nearfield instal-

lation can be chosen similarly to the

open installation settings.

Alternative: In some cases it might

be useful to cut off the sound re-

production in the lower frequency

range (rumble filter) by means of

the LF CUTOFF switch.

The treble should be adjusted ac-

cording to personal gusto.

Close-to-wall installation (e.g. on a

speaker stand or on a wall con-

sole):

When placing a speaker close to

the wall the sound pressure level

especially in the bass range is in-

creasing. This often leads to a

smeary or bubbly bass sound. In

this case it is recommended to ad-

just ACOUSTIC SPACE to -2 dB or

even to -4 dB.

Installation in a rack / on a shelf:

For the installation in an on-wall-

rack there are similar rules as for

the close-to-wall installation (see

above).

On the other hand, for free in the

room located racks (partitions)

there are similar rules as for the

open installation.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Elac AM 180 - Active Monitor in the language / languages: English, German as an attachment in your email.

The manual is 1,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Elac AM 180 - Active Monitor Manual

Product: