Manual Elac AM 180 - Active Monitor (page 18 of 24) (English, German)

561010

Zoom out

Zoom in

1/24

Connection and getting started 15

Unbalanced input: This is the standard input for all common analog sources in the consumer

electronics field. Here you can connect the source by means of the RCA cable (“B”, see

chapter 12) which is part of the accessory kit.

Balanced input: To this input you can connect sources which provide balanced outputs, such

as HighEnd CD players or professional mixing consoles. The input provides a combo-jack

(XLR jack and 6.3 mm TRS jack).

Signals which are applied to the balanced input are mixed together with signals which are

applied to the unbalanced input (1.).

Digital input, compliant to AES/EBU standard: This input can work with signals according to

the AES/EBU standard which is currently used in the professional studio technique.

The digital data stream contains both stereo signals (left and right). By means of the switch

“6” the channel which should be reproduced has to be selected.

The three digital inputs (3, 4 and 5) have different priorities. Is a valid data stream applied to

the digital inputs, the audio data of input 3 are primarily processed.

4. and 5.

Digital inputs and parallel outputs, compliant to S/PDIF standard: These inputs can work with

signals according to the S/PDIF standard (optically = TOSLINK and coaxially), which is used

by most devices in the consumer electronics field.

The digital data stream contains both stereo signals (left and right). By means of the switch

“6” the channel which should be reproduced has to be selected.

Channel selector switch for the digital inputs (3, 4 and 5): If you would like to drive the pow-

ered speaker with a digital signal source, you have to select the reproduced audio channel by

means of the channel selector switch. In a stereo system you should make sure to select the

appropriate channel at each speaker.

Selector switch for analogue or digital input: By means of this switch, you select if the pow-

ered speaker reproduces the signal provided by the source which is connected to the ana-

logue input or the digital input.

Remark: If this switch is not switched to the appropriate position, you will not hear any sound!

Master Volume control: By means of this control you can adjust the reproduced volume. In a

stereo setup you have to make sure that the controls of both AM 180 are adjusted to the

same level. Otherwise you will gain an unbalance between the two channels.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Elac AM 180 - Active Monitor in the language / languages: English, German as an attachment in your email.

The manual is 1,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Elac AM 180 - Active Monitor Manual

Product: