561009

Elac AM 150 - Active Monitor Manual

18
Zoom out
Zoom in
Previous page
1/24
Next page
Connection and starting 15
1.
Unbalanced input: This is the standard input for all common analog sources in the consumer electronics field.
Here you can connect the source by means of the RCA cable (“B”, see p.12) which is part of the accessory kit.
2., 3.
Balanced inputs: To these inputs you can connect sources which provide balanced outputs, such as HighEnd CD
players or professional mixing consoles. The input provides both jacks, XLR jack (3) and TRS jack (2).
Remark: These two jacks are connected in parallel internally, so they shouldn’t be sourced by different
signal sources.
On the other hand, signals which are applied to one of the balanced inputs (2 or 3) and to the unbalanced input
(1) are mixed.
4.
Digital input, compliant to AES/EBU standard: This input can work with signals according to the AES/EBU stan-
dard which is currently used in the professional studio technique.
The digital data stream contains both stereo signals (left and right). By means of the switch “6” the channel which
should be reproduced has to be selected.
The two digital inputs (4 and 5) have different priorities. Is a valid data stream applied to both digital inputs, the
audio data of input 4 are primarily processed.
5.
Digital input and parallel output, compliant to S/PDIF standard: This input can work with signals according to the
S/PDIF standard, which is used by most devices in the consumer electronics field.
The digital data stream contains both stereo signals (left and right). By means of the switch “6” the channel which
should be reproduced has to be selected.
6.
Channel selector switch for the digital inputs (4 and 5): If you would like to drive the powered speaker with a
digital signal source, you have to select the reproduced audio channel by means of the channel selector switch.
In a stereo system you should make sure to select the appropriate channel at each speaker.
7.
Selector switch for analog or digital input: By means of this switch, you select if the powered speaker reproduces
the signal provided by the source which is connected to the analog input or the digital input.
Remark: If this switch is not switched to the appropriate position, you will not hear any sound.
8.
Master Volume control: By means of this control you can adjust the reproduced volume. In a stereo setup you
have to make sure that the controls of both speakers are adjusted to the same level. Otherwise you will gain an
unbalance between the two channels.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elac AM 150 - Active Monitor at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elac AM 150 - Active Monitor in the language / languages: English, German as an attachment in your email.

The manual is 1,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info