561009
20
Zoom out
Zoom in
Previous page
1/24
Next page
Connection and getting started 17
Open installation:
If the speaker is installed in an open envi-
ronment, the bass range should not be
damped. The basis for experiments should
be the default positions (ACOUSTIC
SPACE = 0 dB, HF TRIM = 0 dB, LF CUT-
OFF = FLAT).
In fairly damped rooms (e.g. with carpets,
curtains, many plants etc.) the treble can
reasonably be increased by means of the
HF TRIM switch (HF TRIM = +2 dB).
Nearfield installation (e.g. on a mixing
console):
The settings for the nearfield installation
can be chosen similarly to the open installa-
tion settings.
Alternative: In some cases it might be
useful to cut off the sound reproduction in
the lower frequency range (rumble filter) by
means of the LF CUTOFF switch.
The treble should be adjusted according to
personal gusto..
Close-to-wall installation (e.g. on a speaker
stand or on a wall console):
When placing a speaker close to the wall
the sound pressure level especially in the
bass range is increasing. This often leads
to a smeary or bubbly bass sound. In this
case it is recommended to adjust ACOUS-
TIC SPACE to -2 dB or even to -4 dB.
Installation in a rack / on a shelf:
For the installation in an on-wall-rack there
are similar rules as for the close-to-wall
installation (see above).
On the other hand, for free in the room
located racks (partitions) there are similar
rules as for the open installation.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elac AM 150 - Active Monitor at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elac AM 150 - Active Monitor in the language / languages: English, German as an attachment in your email.

The manual is 1,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info