522622
24
Zoom out
Zoom in
Previous page
1/35
Next page
22
Chapter 4 Troubleshooting
Chapter 4 Troubleshooting
If a problem still remains after applying the suggested remedies, contact your local dealer.
• No-picture problems → See No.1 - No.2.
• Imaging problems → See No.3 - No.11.
• Other problems → See No.12 - No.13.
• Touch panel problems → See No.14 - No.17.
Problems Possible cause and remedy
1.
No picture
Power indicator does not light.
Check whether the power cord is connected correctly.
Press
.
Power indicator is lighting blue. Set each RGB adjusting value in <Gain> to higher level.
(page 16)
Power indicator is lighting orange. Switch the input signal with
.
Operate the mouse or keyboard.
Turn on the PC.
2. The message below appears. This message appears when the signal is not input
correctly even when the monitor functions properly.
This message appears when no signal is input.
The message shown left may appear, because some
PCs do not output the signal soon after power-on.
Check whether the PC is turned on.
Check whether the signal cable is connected properly.
Switch the input signal with
.
The message below shows that the input signal is
out of the specied frequency range. (Such signal
frequency is displayed in red.)
Example:
Select an appropriate display mode using the graphics
board’s utility software. Refer to the manual of the
graphics board for details.
3. Display position is incorrect.
Adjust image position so that it is displayed properly
within the display area using the <Hor.Position> and
<Ver.Position> adjustment.
If the problem persists, use the graphics board’s utility
software if available to change the display position.
4. Vertical bars appear on the screen or a part of the
image is ickering.
Adjust using <Clock>.
5. Whole screen is ickering or blurring.
Adjust using <Phase>.
6. Characters are blurred. Adjust using <Smoothing>.
7. The screen is too bright or too dark. Adjust <Brightness>. (The LCD monitor backlight has a
xed life span. When the screen becomes dark or begins
to icker, contact your local dealer.)
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eizo FlexScan T1502-B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eizo FlexScan T1502-B in the language / languages: English as an attachment in your email.

The manual is 2,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Eizo FlexScan T1502-B

Eizo FlexScan T1502-B User Manual - German - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info