213833
33
Zoom out
Zoom in
Previous page
1/46
Next page
33
Chapter 3 Troubleshooting
●
Messages List
The meanings of the main messages appearing on the screen are described below.
Messages Description
“Your current setting will be lost, if you perform “Auto
Screen Adjust”. Do you continue?”
Appears when performing [Auto Screen Adjust].
“Your current setting will be lost, if you perform “Auto
Range Adjust”. Do you continue?”
Appears when performing [Auto Range Adjust].
“Your current color data will be lost.” Appears when performing <Reset> in the <Color> menu.
Returns the color mode setting currently selected to the
default settings.
“If the eld rate is changed, no picture may be displayed on
screen. Do you change the setting?”
Appears when changing the settings of [Field Rate].
“If the USB setting is changed, the USB connection to the
selected PC will be lost. Do you change the setting?”
Appears when changing the settings of [USB].
Do not change the settings in the following cases.
- When connecting a memory device such as a USB
memory to the monitor
The data may be lost and damaged. Be sure to change
the USB setting after removing the memory device.
- When an application such as a sound playback, etc.
works
The sound may not output if the setting is returned to
the original. Be sure to change the USB setting after
exiting from the application.
“The power will turn off soon. To cancel Off Timer, touch
the slide bar.”
Appears on the display from one minute before the power
turns off to the power-off time when the Off Timer is set.
Touching the slide bar while the message appears will
release the Off Timer setting and the message disappears.
“All settings except for the eld rate and USB are reset.” Appears when performing [Reset] in the Setting menu. Set
all the settings except for [Field Rate], [USB] and [Volume]
to the default settings.
“Volume adjust does not support this sound signal.” Appears when pressing [VOLUME] button on the remote
control or trying to display the shortcut menu of the volume
while receiving the sound signal not corresponding to the
monitor. In this case, no sound is output.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eizo flexscan hd2442w ts at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eizo flexscan hd2442w ts in the language / languages: English as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info