GB
12
upwards/downwards. Press the key twice to lock
the slats in their current position.
4. Press the “FAN” key to select the fan speed:
Automatic -> Slow -> Medium -> Fast
5. Press the “+” or “-” key to set the desired
temperature.
Notes!
앬 The heating mode will only work if the room
temperature set is higher than the current room
temperature. When the set room temperature is
reached, the outdoor compressor stops. The
centrifugal fan of the indoor device circulates the
air in the room.
앬 The room temperature can be set between 16°C
and 30°C with the remote control.
앬 The attainable room temperature is a factor of
local conditions and the outdoor temperature.
The cooler the outdoor temperature, the lower
the attainable room temperature.
앬 Heating mode is only designed for spring and
autumn (up to 0°C).
C) Dehumidifying mode
1. Press the “ON/OFF” key to switch on the device.
2. Press the “MODE” key until the “Dehumidifying”
mode icon appears in the display.
3. Press the “Swing” key. The air flow is adjusted
upwards/downwards. Press the key twice to lock
the slats in their current position.
4. Press the “+” or “-” key to set the desired
temperature.
Notes!
앬 The room temperature can be set between 16°C
and 30°C with the remote control.
D) Automatic mode
1. Press the “ON/OFF” key to switch on the device.
2. Press the “MODE” key until the “Automatic” mode
icon appears in the display. The device auto-
matically switches to cooling, fan or heating mode,
depending on the current room temperature.
3. Press the “FAN” key to select the fan speed:
Automatic -> Slow -> Medium -> Fast
E) Sleep function
1. Press the “ON/OFF” key to switch on the device.
2. Press the “MODE” key until the “Cooling”,
“Dehumidifying” or “Heating” mode icon appears in
the display.
3. Press the “Swing” key. The air flow is adjusted
upwards/downwards. Press the key twice to lock
the slats in their current position.
4. Press the “FAN” key to select the fan speed:
Automatic -> Slow -> Medium -> Fast
5. Press the “+” or “-” key to set the desired
temperature.
6. Press the “Sleep” key to activate the sleep
function.
Notes!
앬 If the cooling or dehumidifying mode is set in
conjunction with the sleep function, the set room
temperature increases (1°C during the first hour
and 2°C during the second hour) in order to
prevent overcooling.
앬 If the heating mode is set in conjunction with the
sleep function, the set room temperature
decreases (1°C during the first hour and 2°C
during the second hour) in order to prevent
overheating.
F) Timer settings (for automatically switching the
device on/off)
Note:
First of all set the current time using the “Clock”
button.
1. “T-ON / Device ON timer button
This button enables you to switch on the unit
automatically (max. 24 hours). The only requirement
is that the device is connected to a power supply.
Press the “ON / OFF” button to deactivate the
“Device ON timer” again.
2. “T-OFF” / Device OFF timer button
This button enables you to switch off the unit
automatically (max. 24 hours). The only requirement
is that the unit is in operation. Press the “ON / OFF”
button to deactivate the “Device OFF timer” again.
G) Additional functions
BLOW function
This function prevents moisture forming on the heat
exchanger in the indoor unit.
If the device is switched off using the ON/OFF button
on the remote control whilst the Blow function is
active, the internal fan will continue to run for around
10 minutes at the lowest fan setting. If you wish to
switch off the internal fan before the end of this time,
press the BLOW button.
TURBO function
An even higher fan speed in cooling or heating mode
will ensure that the required room temperature is
reached more quickly.
LOCK function
Press the “+” and “-” buttons at the same time to lock
