10
Remote control – Fan mode
Press the ON/OFF button (1) and switch on the
device.
Press the “Mode” button (2) and select the “Fan”
mode.
Press the “WIND” (4) button and select your
desired fan speed (H, L, Mute).
Important note:
If you select the “Fan” mode you will not be able to
adjust the temperature. The fan speed “P” is not
adjustable.
Remote control - Sleep mode (automatic sleep
function)
Press the ON/OFF button (1) and switch on the
device.
Press the “Mode” button (2) and select the “Heat”
or “Cool” mode.
Press the “SLEEP” button and the LED in the
display on the indoor device will light up.
Important notes:
Press the button once to switch on the sleep
mode. To switch it off again, press the button a
second time.
The automatic sleep function increases the
temperature by several degrees Celsius in “Cool”
mode.
The automatic sleep function increases the
temperature by several degrees Celsius in “Heat”
mode for the first three hours.
The automatic sleep function switches off
automatically after approx. 7 hours.
While the automatic sleep function is in operation
the “Sleep” LED on the indoor device will be
illuminated.
In “SLEEP” mode the fan speed is automatically
set to “MUTE”.
Pressing the MODE, WIND or ON/OFF button will
switch off the sleep mode.
CAUTION: If you switch on the sleep mode during
the day the room temperature will increase too much
because the cooling function is reduced.