Manual Einhell KGS190 (page 15 of 72) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

782353

Zoom out

Zoom in

1/72

Re-tighten the counter nut (30) to fix the machine

in this setting.

H.) Mitre cuts 0°-45° and rotary table 0°-45°

(Fig. 10)

The KGS 190 can be used to make mitre cuts on the

left at an angle of 0°-45° relative to the work top and

0°-45° relative to the stop rail.

Lift the machine head (4) to its top position.

Undo the rotary table (8) by slackening the two

lock screws (10) on the stop rail.

Adjust the rotary table (8) by its handle (2) to the

required angle (see also Section E).

Re-tighten the two lock screws (10) to fix the

rotary table in position.

Undo the clamping screw (13) and tilt the

machine head (4) by its handle (2) to the required

angle dimension (see also Section F).

Re-tighten the clamping screw (13).

Make the cut as described in Section C.

I.) Chip extractor (Fig. 2)

The saw is equipped with a chip extraction socket

(18).

It is easy therefore to connect the machine to a chip

extraction system.

J.) Replacing the saw blade (Fig. 11)

Pull out the power plug.

Swing up the machine head (4).

Unscrew the 4 recessed head screws (17) and

take off the left saw blade cover (15).

Use the supplied face wrench (11) to lock the

outer flange (a) in place and use the socket

wrench (12) to unscrew the hex screw

(Important: left-hand thread. Unscrew

clockwise!).

Take the saw blade (5) off the inner flange and lift

up and out.

Mount the new saw blade in reverse order and

fasten.

Important! The cutting bevel of the teeth, i.e. the

direction of rotation of the saw blade, has to

conform with the direction of the arrow marked on

the housing.

Clean the saw blade flanges thoroughly before

mounting the saw blade.

Before using the saw again, check that the safety

devices are in good working order.

8. Maintenance

Keep the machine’s air vents unclogged and

clean at all times.

Remove dust and dirt regularly from the machine.

Cleaning is best done with compressed air or a

rag.

Re-lubricate all moving parts in regular intervals.

Never use caustic agents to clean plastic parts.

9. Ordering replacement parts

Please quote the following data when ordering

replacement parts:

Type of machine

Article number of the machine

Identification number of the machine

Replacement part number of the part required

Anleitung KGS 190 30.10.2001 9:23 Uhr Seite 15

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Einhell KGS190 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4.03 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Einhell KGS190 Manual

Product: