Manual Einhell GE-EM 1536 HW (page 28 of 114) (English, German, Dutch, French, Italian, Swedish, Spanish)

546966

Zoom out

Zoom in

1/114

- 28 -

8. Cleaning, maintenance and

ordering of spare parts

Always pull out the mains power plug before star-

ting any cleaning work.

8.1 Cleaning

•

Keep all safety devices, air vents and the

motor housing free of dirt and dust as far as

possible. Wipe the equipment with a clean

cloth or blow it with compressed air at low

pressure.

•

We recommend that you clean the device

immediately each time you have finished

using it.

•

Clean the equipment regularly with a moist

cloth and some soft soap. Do not use

cleaning agents or solvents; these could at-

tack the plastic parts of the equipment. Ensu-

re that no water can seep into the device. The

ingress of water into an electric tool increases

the risk of an electric shock.

8.2 Carbon brushes

In case of excessive sparking, have the carbon

brushes checked only by a qualiﬁ ed electrician.

Important! The carbon brushes should not be rep

laced by anyone but a qualiﬁ ed electrician.

8.3 Maintenance

•

Worn out or damaged blades, blade mounts,

and bolts should be replaced as a set by an

authorized professional in order to keep the

equipment in balance.

•

Do not clean the lawn mower with running

water, particularly with high-pressure water.

Ensure that all mounting components (i.e.

screws, bolts, nuts etc.) are always tightened

so that the equipment can be safely operated

at all times.

•

Frequently check the grass catch assembly

for signs of wear.

•

Replace excessively worn or damaged parts

immediately.

•

Store your lawn mower in a dry room.

•

In order to ensure that you enjoy the equip-

ment for many years to come, all screwed

parts, as well as the wheels and axles, should

be cleaned and lubricated.

•

Keeping your lawn mower in good condition

not only ensures a long lifespan and high per-

formance, but also enables the equipment to

thoroughly cut your grass with minimal effort.

For best results, clean the lawn mower with a

brush or rag. Do not use any solvents or water

to remove dirt.

•

The blade is subjected to more wear and

tear than any other component. Therefore,

routinely check the condition of the blade

and make sure that it is tightly fastened. If the

blade is completely worn out, it must be im-

mediately replaced or ground sharp again. An

excessively vibrating mower means that the

blade is not properly balanced or has become

deformed from striking an object. In this case,

the blade must be repaired or replaced.

•

There are no parts inside the equipment

which require additional maintenance.

8.4 Replacing the blade

For safety reasons, we recommend having the

blade replaced by an authorized professional.Im-

portant. Wear work gloves! Only replace the blade

with a genuine Einhell replacement blade, as this

will ensure top performance and safety under all

conditions.

Carry out the following steps to change the

blade:

1. Undo the fastening screw (see Fig. 17).

2. Remove the blade and replace with a new

one.

3. When ﬁ tting the blade, make sure it is ins-

talled in the right direction. The blade’s air va-

nes must project into the motor compartment

(see Fig. 17). The dome mounts must be

aligned with the punch holes in the blade (see

Fig. 18).

4. Then retighten the fastening screw with a

wrench. The tightening torque should be ap-

prox. 25 Nm.

8.5 Ordering replacement parts:

Please quote the following data when ordering

replacement parts:

•

Type of machine

•

Article number of the machine

•

Identification number of the machine

•

Replacement part number of the part required

For our latest prices and information please go to

www.isc-gmbh.info

Spare blade art. no.: 34.055.90

Anl_GE_EM_1536_HW_M_SPK7.indb 28Anl_GE_EM_1536_HW_M_SPK7.indb 28 31.07.13 15:4831.07.13 15:48

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Einhell GE-EM 1536 HW in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 2,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Einhell GE-EM 1536 HW Manual

Product: