Manual Einhell GC-ET 4526 (page 19 of 120) (English, German, Dutch, French, Italian, Turkish, Spanish)

605958

Zoom out

Zoom in

1/120

GBGB

- 19 -

5. Before starting the equipment

Before you connect the equipment to the mains

supply make sure that the data on the rating plate

are identical to the mains data.

Always pull the power plug before making

adjustments to the equipment.

5.1 Assembling the grass trimmer

(Fig. 3a to 3c)

•

Place the guard hood (Fig. 3a/Item 12) on the

motor head and fasten it to the motor head

with the screw (Fig. 3b/Item A).

•

Place the distance bracket (Fig. 3c/Item 9) on

the motor head as shown in Fig. 3c and fas-

ten it with the screws (Fig. 3c/Item 14).

5.2 Adjusting the additional handle

(Fig. 4a and 4b)

Place the grass trimmer on a rm surface. Swing

back the lock (Fig. 4a/Item 5) and adjust the addi-

tional handle to the optimum position for yourself

(see Fig. 4b). Swing the lock shut (Fig. 4b/Item. 5)

to fasten the handle.

5.3 Height adjustment (Fig. 5)

You can set your optimal working position by ad-

justing the height.

•

Undo the lock for the handlebar adjustment

(Fig. 5/Item 6).

•

Pull out the bottom handlebar (Fig. 5/Item 8)

to the required length.

•

Refasten the lock for the handlebar adjust-

ment (Fig. 5/Item 6).

5.4 Adjusting the angle of the handlebar

(Figure 6)

When the lock is pressed (Fig. 6/Item 15) you can

adjust the angle of the handlebar to 5 positions.

Set the angle which is best suited for your work.

Make sure that there is an audible click when the

handlebar engages.

6. Operation

The grass trimmer has a semi-automatic line

extension system. Each time you activate the

semi-automatic line extension system, the line

is automatically extended to ensure that you can

cut your lawn with the perfect cutting width at all

times. To extend the cutting line run the motor at

full speed and tap the line spool on the ground.

This will automatically extend the line. The blade

on the safety shield will cut the line to the appro-

priate length. Please note that the more often you

activate the semi-automatic line extension sys-

tem, the more the line will wear.

Note: If the line is too long when you use the

equipment for the rst time, the surplus end of it

will be cut by the blade on the guard hood.

If the line is too short when you start the machi-

ne for the rst time, press the knob on the line

spool and pull the line hard. When you start the

equipment again the line will be cut to the perfect

length automatically.

Your grass trimmer will work at its best if you ob-

serve the following instructions:

•

Never use the grass trimmer without its safety

devices.

•

Do not cut grass when it is wet. The best re-

sults are had on dry grass.

•

Connect the power cable to the extension

cable and fasten this to the strain-relief clamp

(Figure 7/Item 13).

•

To switch on your grass trimmer, press the

ON/OFF switch (Fig. 7/Item 3).

•

To deactivate the grass trimmer, let go of the

On/Off switch (Figure 7 / Item 3).

•

Do not move the grass trimmer against the

grass until the switch is pressed, i.e. wait until

the trimmer is running.

•

For the correct cutting action, swing the grass

trimmer to the side as you walk forward, hol-

ding it at an angle of approx. 30° as you do so

(see Figure 8 and Figure 9).

•

Make several passes to cut long grass shor-

ter step by step from the top (see Figure 10).

•

Use the edge guide and the guard hood to

prevent unnecessary wear on the line.

•

Keep the grass trimmer away from hard ob-

jects in order to avoid unnecessary line wear.

Anl_GC_ET_4025_4526_SPK7.indb 19 18.12.13 11:40

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Einhell GC-ET 4526 in the language / languages: English, German, Dutch, French, Italian, Turkish, Spanish as an attachment in your email.

The manual is 4,2 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Einhell GC-ET 4526 Manual

Product: