WARNING: Always stopunit and disconnectspark plug before performing all ofthe recommended remediesbelow exceptremedies
that require operation of theunit.
When you have checked all the possible causes listedand you are stillexperiencing the problem, see your Servicing Dealer. If youare experiencing a problem that
is notlisted in thischart, seeyour Servicing Dealer for service.
PROBLEMPOSSIBLE CAUSESOLUTION
Enginewillnotstartorwillrunonlyafew
secondsafterstarting.
(MakesureIgnition
switch is in start position “I”)
1.No spark
2.Flooded engine
1.Watch for spark at sparkplug tip. If there is no spark, repeat test with a new
spark plug (RCJ-4)
2.Follow procedure page 20. If engine still fails to start, repeat procedurewitha
new spark plug
Enginestartsbutwill not accelerateproperlyor
will notrun properly athighspeed.
Carburetor requires ad
j
ustmentContact a Servicing Dealer for carburetor ad
j
ustment
Enginedoesnot reachfull speedand/ or emits
excessive smoke
1.Check oil fuelmixture
2.Air filter dirty
3.Carburetor requires ad
j
ustment
1.Use fresh fuel andthe correct 2-cycle oilmix
2.Clean per instruction in Maintenance-Air Filter Section
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Efco MT6500 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Efco MT6500 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.
The manual is 4,2 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
