644134

Efco MT6500 Manual

18
Zoom out
Zoom in
Previous page
1/68
Next page
25 26
Italiano
AVVIAMENTO
OLIO LUBRIFICANTE PER CATENA
Una corretta lubrificazione della catena durante le fasi
di taglio riduce al minimo l’usura tra la catena e la
barra, assicurandone una maggiore durata. Utilizzare
sempre olio di buona qualità (Fig. 25).
ATTENZIONE - É proibito l’uso di olio di
recupero! Utilizzare sempre lubrificante
biodegradabile (eco
–
lube Efco p.n. 001001552
(5ℓ) - 001001553 (1ℓ)) specifico per barre e
catene nel massimo rispetto della natura e della
durata dei componenti della motosega.
Prima di avviare il motore, assicurarsi che la
catena non sia in contatto con un corpo estraneo.
Con il motore al minimo, la catena non deve
girare. In caso contrario rivolgersi ad un Centro
Assistenza Autorizzato per effettuare un controllo
e risolvere il problema.
Con motore in moto, afferrare sempre
saldamente l’impugnatura anteriore con la mano
sinistra e quella posteriore con la mano destra
(Fig. 26). Verificare che tutte le parti del corpo
siano lontane dalla catena e dalla marmitta.
L’esposizione alle vibrazioni può causare danni
alle persone che soffrono di problemi di
circolazione sanguigna o problemi nervosi.
Rivolgersi al medico se si verificano sintomi fisici
quali intorpidimento, mancanza di sensibilità,
riduzionedellaforzanormaleovariazionidel
colore della pelle. Questi sintomi di solito
com
p
aiono nelle dita, mani o
p
olsi.
English
STARTING
CHAIN LUBRICATING OIL
Correct chain lubrication during the cutting phase
reduces wear to a minimum between the chain and
bar thus prolonging life. Always use a good qualit
y
oil (Fig. 25).
WARNING - Never use waste oil. Always use
biodegradable lubrificant (eco-lube Efco p.n.
001001552 (5ℓ) - 001001553 (1ℓ)) which is
specific for bar and chain and also respectful
towards nature and chainsaw’s parts.
Before starting make sure the chain is not
obstructed.
When the engine is idling the chain must not
turn. Otherwise contact an Authorized Service
Center to carry out a check and fix the problem.
When the chainsaw is running, grip the front
handle firmly with your left hand and the back
handle with your right hand (Fig. 26). Check
that all parts of the body are kept away from the
chain and muffler.
Over exposure to vibrations can result in
bloodvessel or nerve in
j
ury to persons suffering
with blood circulation problems. Seek medical
attention if you experience physical symptoms
such numbness, lack of feeling, reduction in
normal strength, changes in the colour of the
skin. These symptoms normally appear in the
fin
g
ers, hands or wrists.
Français
MISE IN ROUTE
HUILE LUBRIFIANTE POUR CHAINE
Une bonne lubrification de la cha
î
ne pendant les phase
s
de coupe réduit au minimum l’usure entre la cha
î
ne et le
guide, ce qui en assure une plus longue durée. Utilisez
tou
j
ours de l’huile de bonne qualité (Fig.25).
ATTENTION - N’utilisez surtout pas d’huile
récupérée ! Utiliser tou
j
ours lubrifiant biodégradable
(eco-lube Efco p.n. 001001552 (5ℓ) - 001001553
(1ℓ)) spécifique pour barre et chaine dans le plus
grand respect de la nature et de la durée des
composants de la tronçonneuse.
Avant de mettre le moteur en marche, veillez à ce
que la cha
î
ne ne soit pas en contact avec des corps
étrangers.
La cha
î
ne ne doit pas tourner quand le moteur est
au ralenti. Sinon, contactez un Centre de Service
Agréé de procéder à une vérification et corriger le
problème.
Quand le moteur tourne, saisissez tou
j
ours
fermement la poignée avant de la main gauche et la
poignée arrière de la main droite (Fig. 26). Ne vous
approchez pas de la cha
î
ne ni du pot
d'échappement.
L'exposition aux vibrations peut entra
î
ner des
problèmes aux personnes souffrant de troubles
circulatoires ou de nature nerveuse. Demander
l'avis d'un médecin en cas de symptômes
physiques tels qu'engourdissements, absence de
sensibilité, réduction de la force normale ou
variations de la couleur de la peau. Ces symptômes
se présentent normalement au niveau des doigts,
mains ou
p
oi
g
nets.
18
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Efco MT6500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Efco MT6500 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info