Manual Efco MT1800 (page 29 of 202) (English, German, Dutch, French, Italian, Polish, Portuguese, Portuguese, Spanish)

644119

Zoom out

Zoom in

1/202

RUS



WARNING: The power supply system

on your unit produces a very low-

intensity electromagnetic field. This field

could interfere with certain pacemakers.

To reduce the risk of serious or fatal injury,

persons with pacemakers should consult

their doctor or the manufacturer of the

pacemaker before using this machine.

WARNING: – National regulations could

limit use of the machine.

1 - Do not operate the machine unless you

have received specific instruction on

its use. First time users must familiarise

themselves thoroughly with the operation

of the machine before working in the field.

2 - The electric saw must only be used by

adults, and users must be in good physical

shape and familiar with the operating

instructions.

3 - Assemble bar and chain before

connecting the plug to the network (Fig.

2).

4 - Never start the electric saw without the

chain-guard on.

5 - Check that tension and frequency shown

on the plate correspond to the ones of the

network.

6 - Never use cables, plugs or extensions

which are defective or fail to comply with

relative standards.

7 - Immediately disconnect the plug if the

cable is damaged or cut. The electric

connection must be positioned so as

to prevent persons or vehicles from

damaging it, thus jeopardizing both

themselves and you.

8 - Check the cable location during work: it

must always be kept away from the chain

work area or/and never be stretched.

Never cut in the vicinity of other electrical

cables.

9 - Always cut from a firm-footed and safe

position. Only start cutting when the chain

is moving. During work use the teeth as a

support point.

10 - Ensure that trees fall in a safe direction.

11 - It is prohibited to fit any device other than

that supplied by the manufacturer.

12 - All labels with health hazards must be kept

in good conditions. In case of damage or

deterioration, immediately substitute

them (see Fig. 1).

13 - Never carry out operations or repairs on

your own that are other than routine

maintenance. Call specialised and

authorised workshops only.

14 - Always follow the manufacturer’s

instructions for the maintenance

operations.

15 - Check the saw daily to ensure that all

safety and other devices are working

properly.

16 - Never work with a saw that is damaged,

poorly repaired, or randomly modified. Do

not remove, damage, or make ineffective

any of the safety devices. Only use bars of

the length indicated in the table (Pag. 33).

17 - Only loan your saw to expert users who

are completely familiar with saw operation

and correct use. Give other users the

manual with operating instructions, which

they should read before using the saw.

18 - All electric saw service, other than the

operations shown in the present manual,

should be performed by competent

personnel.

19 - Keep this manual on hand and consult it

before each use of the tool.

20 - Please note that the owner or the user is

responsible for any accidents or damage

to third parties or their property.

Efco MT1800 E giving trouble trying to switch on if I turn it on its side it starts but intermittent are new switches available and can I fit myself please Submitted on 22-5-2020 at 12:32
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Efco MT1800 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Portuguese, Spanish as an attachment in your email.

The manual is 2,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Efco MT1800 Manual

Product: