Manual Efco MT1800 (page 28 of 202) (English, German, Dutch, French, Italian, Polish, Portuguese, Portuguese, Spanish)

644119

Zoom out

Zoom in

1/202

RUS

• Wear safety glasses and hearing

protection. Further protective equipment

for head, hands, legs and feet is

recommended. Adequate protective clothing

will reduce personal injury by flying debris or

accidental contact with the saw chain.

• Do not operate a chain saw in a tree.

Operation of a chain saw while up in a tree may

result in personal injury.

• Always keep proper footing and operate

the chain saw only when standing on fixed,

secure and level surface. Slippery or unstable

surfaces such as ladders may cause a loss of

balance or control of the chain saw.

• When cutting a limb that is under tension

be alert for spring back. When the tension in

the wood fibres is released the spring loaded

limb may strike the operator and/or throw the

chain saw out of control.

• Use extreme caution when cutting brush

and saplings. The slender material may catch

the saw chain and be whipped toward you or

pull you off balance.

• Carry the chain saw by the front handle

with the chain saw switched off and away

from your body. When transporting or

storing the chain saw always fit the guide

bar cover. Proper handling of the chain saw

will reduce the likelihood of accidental contact

with the moving saw chain.

• Follow instructions for lubricating, chain

tensioning and changing accessories.

Improperly tensioned or lubricated chain may

either break or increase the chance for kickback.

• Keep handles dry, clean, and free from oil

and grease. Greasy, oily handles are slippery

causing loss of control.

• Cut wood only. Do not use chain saw for

purposes not intended. For example: do

not use chain saw for cutting plastic,

masonry or non-wood building materials.

Use of the chain saw for operations different

than intended could result in a hazardous

situation.

Causes and operator prevention of kickback:

Kickback may occur when the nose or tip of the

guide bar touches an object, or when the wood

closes in and pinches the saw chain in the cut (Fig.3).

Tip contact in some cases may cause a sudden

reverse reaction, kicking the guide bar up and

back towards the operator.

Pinching the saw chain along the top of the

guide bar may push the guide bar rapidly back

towards the operator.

Either of these reactions may cause you to lose

control of the saw which could result in serious

personal injury. Do not rely exclusively upon

the safety devices built into your saw. As a

chain saw user, you should take several steps to

keep your cutting jobs free from accident or

injury.

Kickback is the result of tool misuse and/or

incorrect operating procedures or conditions

and can be avoided by taking proper

precautions as given below:

• Maintain a firm grip, with thumbs and

fingers encircling the chain saw handles,

with both hands on the saw and position

your body and arm to allow you to resist

kickback forces. Kickback forces can be

controlled by the operator, if proper precautions

are taken. Do not let go of the chain saw.

• Do not overreach and do not cut above

shoulder height. This helps prevent

unintended tip contact and enables better

control of the chain saw in unexpected

situations.

• Only use replacement bars and chains

specified by the manufacturer. Incorrect

replacement bars and chains may cause chain

breakage and/or kickback.

• Follow the manufacturer’s sharpening and

maintenance instructions for the saw

chain. Decreasing the depth gauge height can

lead to increased kickback.



WARNING - If correctly used, the

electric saw is a quick, easily handled

and efficient tool; if used improperly or

without the due precautions it could become

a dangerous tool. For pleasant and safe

work,always strictly comply with the safety

rules that follow and throughout this

manual.

Efco MT1800 E giving trouble trying to switch on if I turn it on its side it starts but intermittent are new switches available and can I fit myself please Submitted on 22-5-2020 at 12:32
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Efco MT1800 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Portuguese, Spanish as an attachment in your email.

The manual is 2,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Efco MT1800 Manual

Product: