644116

Efco DS2800 Manual

42
Zoom out
Zoom in
Previous page
1/68
Next page
42
Italiano FrançaisEnglish
MANUTENZIONE
ENTRETIENMAINTENANCE
66
67
68 69
AFFILATURA DELLE LAME TAGLIA ERBA
234 DENTI
1. Le lame taglia erba sono rovesciabili: quando un lato
non è più a lato, la lama puė essere rovesciata e si puė
usare l’altro lato (Fig. 69).
2. Le lame taglia erba si a lano con una lima piatta a
taglio semplice (Fig. 70).
3. Per mantenere l’equilibratura, limare in modo uniforme
tutti i taglienti
4. Se le lame non sono a late correttamente possono creare
vibrazioni anomale alla macchina con conseguente
rottura delle lame stesse.
AFFILATURA DISCO
Ver i care sempre le condizioni generali del disco.
Una corretta a latura del disco permette il massimo
rendimento del decespuglitore.
Per a lare i denti, utlizzare una lima o mola quindi
procedere a piccoli tocchi rispettando gli angoli e le
dimensioni riportate in Fig. 66-67.
ATTENZIONE! - Un utensile di taglio sbagliato o
una lama a lata in modo sbagliato aumentano i rischi di
contraccolpo. Controllare le lame taglia erba per individuare
danni o incrinature; se sono danneggiate sostituirle
(Fig. 68).
ATTENZIONE: Non saldare, raddrizzare o
modificare la forma di apparati di taglio danneggiati
nel tentativo di ripararli. Queste operazioni possono
determinare il distacco dell’apparato di taglio e provocare
lesioni gravi o letali.
AFFÛTAGE DES LAMES COUPEHERBES
234 DENTS
1. Les lames coupe-herbes peuvent être retournées:
lorsqu’un côté n’est plus a ěté, retourner la lame pour
l’utiliser de l’autre côté (Fig. 69).
2. A ěter les lames à l’aide d’une lime plate à section simple
(Fig. 70).
3. Pour maintenir l’équilibrage, limer toutes les parties
coupantes de faćon uniforme.
4. Si les lames ne sont pas a ětées correctement, elles
risquent de créer des vibrations anormales sur la machine,
ce qui entraînerait la rupture des lames.
AFFUTAGE DU DISQUE
Véri ez toujours les conditions générales du disque.
Un a ětage correct du disque vous procurera un rendement
maximum de la débroussailleuse.
Pour a ěter les dents utilisez une lime ou meule et procédez
par àcoups en respectant les angles et les dimensions
repostées à la Fig. 66-67.
ATTENTION! – Un mauvais outil de coupe ou une
lame mal a ětée font augmenter les risques de contrecoups.
Contrôler les lames du coupe-herbes pour identi er si elles
sont endommagées; si elles le sont, les remplacer (Fig. 68).
AVERTISSEMENT : Ne tentez jamais de réparer
un outil de coupe endommagé en soudant, redressant
ou modifiant sa forme de quelque façon que ce soit. Cela
pourrait contribuer au délogement de l’outil de coupe
et provoquer des blessures graves, voire mortelles.
BLADE SHARPENING 234 TOOTH
1. Blades are reversible: when one side is no longer
sharp, the blade can be turned over and used on the
other side (Fig. 69).
2. Blades are sharpened using a  at single-cut  l e
(Fig. 70).
3. To maintain the correct balance,  le all cutting edges
uniformly.
4. If the blades are not sharpened correctly, this can
set up abnormal vibrations in the machine and cause
the blades themselves to break ultimately.
BLADE SHARPENING
Always check the general condition of the blade.
Correct sharpening permits the maximum performance
of the brush cutter. To sharpen the teeth, use a  le or
grindstone and proceed with light touches, respecting
the corners and the dimensions shown in Fig. 66-67.
WARNING! – e wrong type of cutter or an
incorrectly sharpened blade will increase the riNL of
kickback. Check mower blades for deterioration or
cracks, and replace if damaged (Fig. 68).
WARNING: Never repair damaged cutting
attachments by welding, straightening or modifying
the shape. This may cause parts of the cutting tool
to come off and result in serious or fatal injuries.
… 42 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Efco DS2800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Efco DS2800 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info