644116

Efco DS2800 Manual

16
Zoom out
Zoom in
Previous page
1/68
Next page
16
Italiano FrançaisEnglish
FITTING THE NYLON LINE HEAD (Fig. 9)
Put the upper (F)  ange in place. Put the head  xing pin
(L) in the appropriate hole and tighten the head (N) anti-
clockwise by hand.
FITTING THE HANDLE (Figs. 10-11)
Fit the handle onto the sha arm and secure it using screws
(A), washers, and nuts.  e handle position is calculated
depending on the requirements of the operator.
TWIN
- Remove screw (D, Fig.12) from handle grip.
- With throttle lever facing the opposite side of operator,
t the tube on the handle grip.
- Mount screw (D).
WARNING: Make sure that all components are
connected properly and all screws tightened.
HARNESS
Correct adjustment of the harness permits the brush cutter
to be properly balanced and at an appropriate height from
the ground (Fig. 13).
- Put on the single or double harness.
- Hook the brush cutter to the harness using the hook
(A, Fig. 14-15).
- Position the hook (B, Fig. 14-15) to obtain the best brush
cutter balance.
- Position the buckle (C, Fig. 16) to obtain the correct
brush cutter height.
ASSEMBLAGGIO ASSEMBLAGEASSEMBLY
MONTAGGIO TESTINA A FILI DI NYLON (Fig. 9)
Inserire la  angia superiore (F). Inserire il perno fermo
testina (L) nell’apposito foro ed avvitare in senso antiorario
la testina (N) con la sola forza delle mani.
MONTAGGIO IMPUGNATURA (Fig. 10-11)
Montare l'impugnatura sul tubo di trasmissione e
ssarla tramite viti (A), rondelle e dadi. La posizione
dell'impugnatura è registrabile in funzione all'esigenza
dell'operatore.
TWIN
- Smontare la vite (D, Fig.12) dall’impugnatura.
- Inserire sul tubo l’impugnatura, con l’acceleratore rivolto
dalla parte opposta rispetto all’operatore.
- Rimontare la vite (D).
ATTENZIONE: Assicurarsi che tutti i
componenti del decespugliatore siano ben collegati e
le viti serrate.
CINGHIAGGIO
Una corretta regolazione del cinghiaggio permette al
decespugliatore di avere un buon bilanciamento ed una
adatta altezza dal terreno (Fig. 13).
- Indossare il cinghiaggio di tipo semplice o doppio.
- Agganciare il decespugliatore al cinghiaggio tramite il
moschettone (A, Fig. 14-15)
- Posizionare il gancio (B, Fig. 14-15) per ottenere il
miglior bilanciamento del decespugliatore.
- Posizionare la  bbia (C, Fig. 16) per ottenere la
corretta altezza del decespugliatore.
MONTAGE DE LA TETE AUX FILS DE NYLON
(Fig. 9)
En lez la bride supérieure (F). En lez le goujon qui va
bloquer la tête (L) dans son ori ce et vissez à la main, dans
le sens contraire des aiguilles d'une montre, la tête (N).
MONTAGE DE LA POIGNEE (Fig. 10-11)
Montez la poignée sur le tuyau de transmission et  xez-
la avec les vis (A), les rondelles et les écrous. La position
de la poignée se règle selon les exigences de l'opérateur.
TWIN
- Démonter la vis (D, Fig. 12) de la poignée.
- En ler la poignée sur le tube, en ayant soin de tourner
l’accélérateur du côté opposé à l’opérateur.
- Remonter la vis (D).
ATTENTION: Veillez à ce que tous les composants
soient bien relié et les vis serrées.
LES COURROIES
Un bon réglage du système de courroies permet à la
débroussailleuse d'avoir un bon équilibre et d'être à une
hauteur du sol adéquate (Fig. 13).
- En lez la courroie simple ou la double.
- Accrochez la débroussailleuse à la courroie à l'aide du
crochet (A, Fig. 14-15).
- Positionnez le crochet (B, Fig. 14-15) de manière à
obtenir le meilleur équilibre pour la débroussailleuse.
- Placez la boucle (C, Fig. 16) de manière à ce que la
débroussailleuse soit à la bonne hauteur.
9
10
11
12
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Efco DS2800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Efco DS2800 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info