810935
21
Zoom out
Zoom in
Previous page
1/40
Next page
21
ENGLISH
HYDRAULIC INSTALLATION
HYDRAULIC INSTALLATION
Widro 85 is designed to install to a water circuit with
Widro 85 is designed to install to a water circuit with
open expansion vessel.
open expansion vessel.
Widro 85 can be installed on circuits with open expansion
Widro 85 can be installed on circuits with open expansion
vessels (check local regulations), providing the fittings
vessels (check local regulations), providing the fittings
are connected to the thermal discharge valve of the coil.
are connected to the thermal discharge valve of the coil.
Never light the fire in the product (even to
test it) when the circuit is dry (no water);
doing so may irreparably damage the
appliance.
HYDRAULIC CONNECTIONS
The hydraulic connections depend on the type of
system.
However, there are a few “general rules”:
The presence of a puffer (inertial storage tank) is
recommended but not mandatory. Its advantage is
that it releases the product from “sudden” requests
from the system and can be integrated with other
heat sources. It reduces fuel consumption and
increases the efficiency of the system.
The return temperature of water must be higher
than at least 50–55 °C to prevent condensate from
forming.
An accumulator (tank) is needed to heat low-
temperature radiant panels and must be installed
according to the panel manufacturer's instructions.
The material used in the circuit must be suitable to
withstand overheating.
Direct plumbing to radiators prevents proper
operation, owing to the small diameter of their pipes.
EXTERNAL WATER CIRCUIT KITS (OPTIONAL)
EXTERNAL WATER CIRCUIT KITS (OPTIONAL)
FOR OPEN/CLOSED EXPANSION VESSEL
FOR OPEN/CLOSED EXPANSION VESSEL
For simple installation, Edilkamin offers pre-assembled
For simple installation, Edilkamin offers pre-assembled
kits for installation outside the product.
kits for installation outside the product.
The product you require depends on the type of circuit
The product you require depends on the type of circuit
you are installing.
you are installing.
INSTALLATION
INSTALLER
The return temperature of water must be higher than at least 50–55 °C to prevent condensate from
forming.
An anti-condensation system is essential and failure to install one will invalidate the warranty, on the basis
of incorrect installation.
The appliance must be correctly sized,
The appliance must be correctly sized,
installed, maintained and operated
installed, maintained and operated
in compliance with local and national
in compliance with local and national
law and European regulations. For
law and European regulations. For
the installation, and for anything not
the installation, and for anything not
specifically indicated in the manual,
specifically indicated in the manual,
observe local regulations.
observe local regulations.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Edilkamin WIDRO 85 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Edilkamin WIDRO 85 in the language / languages: English as an attachment in your email.

The manual is 2.77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Edilkamin WIDRO 85

Edilkamin WIDRO 85 Usermanual and installation guide - German - 44 pages

Edilkamin WIDRO 85 Usermanual and installation guide - French - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info