810817
33
Zoom out
Zoom in
Previous page
1/208
Next page
33
The TINY pellet stove is equipped with SISTEMA LEONARDO®.
LEONARDO® is a combustion safety and control system which allows optimal performance in all
conditions.
This is a safety system that allows optimum operation in all conditions.
LEONARDO®ensures excellent operation thanks to two sensors measuring the pressure level in the combustion
chamber and smoke temperature. The detection of and subsequent optimisation of these two parameters is continuous
in order to correct operation anomalies in real time.
The LEONARDO®system offers constant combustion, automatically regulating the draft based on the characteristics
of the chimney flue (bends, length, shape, diameter, etc.) and environmental conditions (wind, humidity, atmospheric
pressure, installations at high altitude, etc.). The standards for installation must be respected.
LEONARDO®system is also able to recognise the type of pellets and automatically adjust the flow moment by
moment to ensure the required level of combustion.
FEATURES
ELECTRONIC CIRCUIT BOARD KELLY
wiring diagram
ELECTRONIC CIRCUIT BOARD TINY
wiring diagram
ENGLISH
+---
DAB C
H
L
G
F
F
M
N
R
P
+---
Legenda:
TM
GLH
MNFLOW
SENSOR
THERMOCOUPLE
RS232/AUX
AUX SMOKE RPM
RS232/485
SERVICE
IN T° J
SENSOR AIR
AMBIENT (optional)
F
SOS
DABC
Smoke expulsion
motor INGNITION ELEMENT
FUSE 2AT
230 Vac POWER SUPPLY
50-60 Hz +/-10%
FTM 150 °C
BACKUP
BATTERY
LITHIUM
CR2032 P
R
M SCREW
VENTILATION
Reading
points
Vacuum gauge
P2 P1
SMOKE THERMOCOUPLE
SMOKE RPM
VENTILAZIONE
TM
230 Vac power supply
50 Hz +/-10%
FUSE 2AT
RS232
SENSOR AIR AMBIENT
I/O CONSOLLE
IN T° J
CONSOLLE
SENSOR AMBIENT
INGNITION ELEMENT
FLOW
SENSOR M SCREW
BACKUP
BATTERY
LITHIUM
CR2032
Smoke expulsion
motor
SERIAL PORT
The Dealer can install an optional on the AUX outlet for controlling the process of switching on and off (e.g. telephone
remote, local thermostat), located at the rear oh the stove.
Can be connected via special optional trestle (TINY code 621240 - KELLY code 620550).
The serial port is located inside the stove on the lefthand side.
BACKUP BATTERY
A backup battery is found on the control board (3-Volt CR 2032 battery).
Its failure (not considered a product defect, but normal wear and tear) is indicated with the words "Battery check" for
the TINY model and "Batt. 1 - Batt. 2" for the KELLY model.
For more detailed information, please contact the DEALER who has performed the first 1st ignition.
ROOM TEMPERATURE SENSOR
An outlet for the 1 metre-long room temperature cable is provided on the back of the stove.
The sensor, which will be attached to the wall using the bracket provided, is wired onto the end
of the cable.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Edilkamin Kelly at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Edilkamin Kelly in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 8.89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info