499659
31
Zoom out
Zoom in
Previous page
1/115
Next page
- 31 -
Switching off
Hold the 0/1 key down for two seconds while the stove is operating. The shutdown starts and the word Off appears on the display
(for 10 minutes).
During shutdown:
• Pellet loading ceases.
• Ventilation turns up to maximum.
• The water circulates.
Never unplug the stove while it is shutting down.
CLOCK SETTING (DATE AND TIME)
Press the Menu key for two seconds to access the Prog. Use the + or – keys to read the Set. Press Menu. Set the date and time
displayed by pressing the + and – keys.
Press Menu and ‘day’ will appear on the display (the day of the week from 1 to 7). Set this with the + and – keys and conrm by
pressing Menu.
Press on/off for a few seconds to exit.
TIMER SETTING FOR EACH DAY OF THE WEEK
The weekly timer setting is in-built in the panel.
Three programs are available to set the ignition time:
Pr01 : the desired time for ignition and shut down must be set
Pr02 : the desired time for ignition and shut down must be set
Pr03 : the desired time for ignition and shut down must be set
For each day of the week (day 1=Monday; day 2=Tuesday...day 7=Sunday) more than one of the three programs available can be set.
ACTIVATING THE TIMER SETTING
Press the Menu key for two seconds to access the Prog. Press Menu. ‘Pr On’ will appear on the display. Press Menu. ‘On’ or ‘Off’
will appear on the display. It is set to ‘On’ with the + or – keys. Conrm by pressing Menu. (Prog will be displayed). Press on/off
to exit the program.
SETTING A PROGRAM (e.g. Pr01)
Press the Menu key for two seconds to access the Prog. Press Menu. ‘Pr On’ will appear on the display. Press + or – to go to Pr1.
Press Menu. ‘On P1’ appears on the display with the time which is to be set (this is the time it is to go on). Conrm by pressing
Menu and adjust ‘Off P1’ (this is the time it is to shut down).
By pressing Menu ‘offd1’ will appear on the display (i.e. Pr 01 is not activated for day 1, Monday). Press the + key to activate it
and ‘Ond1’ will appear on the display, i.e. the ignition and shut down settings of program 1 are activated for Monday.
Press Menu to move on to the next day, Tuesday, and so on up to day 7.
Press on/off to exit.
The above steps are to be followed to set the time for ignition and shut down for Pr 02 and Pr 03 and to select which days are to be
set on or off for Pr 02 and Pr 03.
ENGLISH
ENGLISH
31


Need help? Post your question in this forum.

Forumrules
1

Forum

edilkamin-idrotech

Reset search

  • quando la stufa non é funzionante nel display esce la scritta "bat 1" e lampeggia. qual'é il motivo? Submitted on 30-3-2022 at 15:44

    Reply Report abuse
    • Prova a cambiare la batteria del CMOS e tipo quella del telecomando della machina se non sbaglio 3510 Answered on 24-9-2022 at 01:04

      Vote up Report abuse
  • avendo un impianto piccolo vorrei attivare la funzione eco nella mia stufa idrotech come si fa? Submitted on 7-11-2021 at 19:54

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Edilkamin IDROTECH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Edilkamin IDROTECH in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info