810849
26
Zoom out
Zoom in
Previous page
1/80
Next page
- 26 -
ENGLISH
INSTALLATION OF
HOT-AIR CIRCULATION KITS
There are three kits for ducting hot air that in-
clude everything necessary for the following
three cases:
Kit one (Figs. D - E)
only the fireplace room
- remove the two pre-cut plugs from the Fire-
box® cover by pressing inwards;
- fasten the two connectors on the holes in
the hood;
- insert the two pipes and x them with the
clamps provided;
- attach the two outlet "B2" frames with con-
nection pipe to the top of the mantel;
- attach the two slots "G1" to the bottom of
the mantel;
- connect the two aluminium connection
pipes and fasten with clamps; t the two front
grilles and click them into place.
Kit two (Fig. F)
fireplace room, plus one adjacent room
Proceed as for kit one, tting one complete
outlet "B1" to the top of the mantel instead of
two "B2", and an outlet "B3" to the wall of the
room to be heated.
At the base of the mantel, only one slot "G1”
is required.
Kit three (Fig. G)
fireplace room, plus two adjacent rooms
Proceed as for kit one, tting the two "B3" out-
lets to the walls of the rooms to heat instead
of the two "B2" outlets.
This kit entails the use of a slot (G1) in the
top of the mantel to allow ventilation inside
the mantel itself.
NATURAL CONVECTION
This occurs when the air circulates naturally in
the cavity and ducting by exploiting convec-
tion (the physical principle that causes hot air
to rise).
FORCED VENTILATION (Fig. H)
This is achieved with the use of two fans (17)
inserted in the lower part of Firebox®, a tem-
perature thermostat housed next to one of the
two fans and a two-speed switch (18) to be
placed near the replace.
Connecting the forced-ventilation equip-
ment:
- connect the switch to the fans by inserting
connector (M) into connector (F).
- connect the switch to the 230 VAC mains
using the plug (S).
Operation of the two-speed switch:
- to start the fans, set the switch to "manual"
( rst or second speed as desired).
- to stop the fans set the switch to "auto-
matic
N.B.: in the "automatic" position, the fans op-
erate automatically when the air temperature
is above 50°C, to prevent damage from ex-
cessive heat, and then
they remain off at lower temperatures.
FIREBOX® Installation Instructions
Fig. G
Fig. H
Fig. D
Fig. E
Fig. F
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Edilkamin Firebox Deco at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Edilkamin Firebox Deco in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2.51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Edilkamin Firebox Deco

Edilkamin Firebox Deco User Manual - English - 24 pages

Edilkamin Firebox Deco User Manual - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info