499643
23
Zoom out
Zoom in
Previous page
1/84
Next page
- 23 -
The stove is delivered fully assembled. If however you need to dismount the covering, proceed as follows:
Unscrew the rear (54) and the two bars (74) dismount the cover, the cast iron top (72) and the ceramic top (28).
Remove the metal sides (80) and, if necessary, the aluminium bars (83) on the base.
Remove the front panel (22) and then the top rear panel (24) from the guides on the grille.
Loosen the two screws to remove the bottom front panel (22) as shown in detail ”X”.
To assemble, proceed in reverse order.
ELITE covering assembly
• Equippment and small items:
2 M6x25 screws
2 M6x12 screws
4 silicone spacers for ceramic top
8 Ø 6 at washers
- the 2 M6x25 screws and the 2 M6
at washers are to be used for xing
the ceramic top panel (22).
- the 2 M6x12 screws and the 2 M6
at washers are to be used for xing
the ceramic bottom panel (22).
- As for the 4 spacers and the 4
washers, proceed as follows:
Insert the 4 spacers in their respective
4 holes on the cast iron top. Put the
ceramic top to verify the correct
atness.
If necessary, insert a at washer
between the silicone spacer and the
cast iron top, in order to bring the
ceramic top to level with the stove.
ENGLISH
ENGLISH
2 screws
detail “X”
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Edilkamin Evolution Line - Elite at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Edilkamin Evolution Line - Elite in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info