499643

Edilkamin Evolution Line - Elite Manual

22
Zoom out
Zoom in
Previous page
1/84
Next page
- 22 -
CHIC covering assembly
• Equippment and small items:
2 M6x25 screws
2 M6x12 screws
4 silicone spacers for ceramic top
8 Ø 6 at washers
- the 2 M6x25 screws and the 2 M6 at wa-
shers are to be used for xing the ceramic top
panel (22)
- the 2 M6x12 screws and the 2 M6 at
washers are to be used for xing the ceramic
bottom panel. (22)
- As for the 4 spacers and the 4 washers, pro-
ceed as follows:
Insert the 4 spacers in their respective 4 holes
on the cast iron top. Put the ceramic top to
verify the correct atness.
If necessary, insert a at washer between the
silicone spacer and the cast iron top, in order
to bring the ceramic top to level with the
stove.
• Ceramic components assembly
The ceramic components are delivered in a
cardboard box and are composed of:
6 side tiles (54)
2 panels (22)
1 top panel (24)
1 top (28)
Unscrew the rear (54) and the 2 bars (74) and insert the tiles (57) on the right-hand-side.
The tiles, made through casting, could result with slightly different heights from one another.
If so, you can use the rubber bungs provided, which do not affect in any way the aesthetics of the stove.
Insert 3 rubber bungs (58) between one tile and the other starting from the base, then mount the bar (74) back on. Repeat the same
operation on the other side.
Insert 
and seal it with silicone.
Place the top (28). Place the second front panel (22) and x it with the two screws provided as shown in detail ”X”
NOTE: the red crystal varnish applied on the majolica cracks evenly on the whole surface.
These cracks are not a fault but a feature of the varnish applied on majolica known as “craclè”.
The ceramic (majolica) components are manually cast and varnished and therefore, can present little imperfections (small depression
or porosity of the varnish) that however do not affect their quality being an evidence of valuable handicrafts production.
ENGLISH
ENGLISH
2 screws
detail “X”
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Edilkamin Evolution Line - Elite at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Edilkamin Evolution Line - Elite in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info